Site work and renovation of a water / sewer project in Belton, Texas. Completed plans call for the renovation of a water / sewer project; and for site work for a water / sewer project.

Scope Package 4 consists of only Plant 2 work in bold below. Construct maintenance improvements to the Lake Belton WTP Plants 1, 2 and 4; and expand Lake Belton WTP at Plant 3 to reach a 102.5 MGD firm capacity. Based on commitments from the Board, the following scope is included in this project: Full Plant Maintenance Scope: Plant 1 Improvements Flocculation Basin Baffle Wall Replacement (remove redwood baffles and install ported concrete walls) Sludge Collector Replacement Plant 1 and 2 Filter Backwash Blower Replacement Chlorine Scrubber Installation Replacement of the existing LAS Tanks and structural/architectural improvements to provide a fabric canopy over the bulk storage area. Upgrades of the Sludge Pump Station Plant 2 Improvements Sludge Collector Replacement Plant 4 Maintenance Improvements Replacement of the existing LAS Tanks and structural/architectural improvements to provide a fabric canopy over the bulk storage area. 48-inch Gate Valve Improvement Plant 3 Expansion Capacity Scope: Replace three existing raw water pumps with larger Raw Water Pumps and VFD improvements in an existing Electrical Building. Demolition of the Plant 3 Clarifiers and construction of conventional rapid mix, flocculation, and sedimentation (with circular sludge collectors) basins. Plant 3 Electrical Upgrades Plant 3 Chemical Storage and Chemical Feed Improvements: Replacement of the existing LAS Tanks and structural/architectural improvements to provide a fabric canopy over the bulk storage area. Installation of a new electrical duct bank and feeders from the old substation to the raw water electrical building. Miscellaneous Site and Yard Piping Improvements associated with the above-described scope.