Site work for an industrial development in Columbus, Ohio. Completed plans call for site work for a one-story above grade industrial development.

The Solid Waste Authority of Central Ohio (SWACO) is accepting sealed bids from qualified suppliers for the purchase and installation of Material Handler #2 at Jackson Pike Transfer Station. This Project is being performed at Jackson Pike Transfer Station ("JPTS"). JPTS will be in operation for the duration of construction. Successful Bidder will be responsible for performing construction without obstructing daily operations and maintaining power to the site. The Project, from closing the construction area to installation of the material handler, is to take no longer than five (5) weeks. Site visits are optional and must be scheduled with Mr. Wes Jordan and completed prior to October 14, 2025. Registration is required to download the RFB documents at www.swaco.org/Bids.aspx. Bids must be received by SWACO no later than 1:30 p.m. (EST) October 24, 2025. All questions concerning the RFB must be submitted in writing to SWACO Procurement at procurement@swaco.org. No phone calls are permitted. SWACO reserves the right to reject any and all bids and to waive minor irregularities or informalities in the selection process. Deadline for questions or clarification 4:00 p.m., October 17, 2025 - Contact SWACO Procurement in writing only at procurement@swaco.org for questions concerning this RFB. A. General. Provide all labor, materials, tools, and equipment necessary to construct the project in accordance with the plans and as specified herein. B. The project consists of the installation of a new material handler, including foundation pad and electrical service at the existing Jackson Pike Transfer Station located at 2566 Jackson Pike in Columbus, Ohio 43223 along with assistance in the installation of an Owner purchased material handler unit. This includes cutting and demolition of the existing concrete floor as needed for the foundation pad and buried electrical conduit as well as floor replacement/repair as needed. The installation assistance of the material handler shall include installation of the concrete foundation and electrical conduit and wiring, including assistance in offloading the handler from the delivery trucks and installation of the necessary anchor bolts within the concrete foundation. Unloading, assembly, and movement of the unit to the foundation pad will be performed by others with the Contractor providing assistance in setting the anchor bolts and in making the final electrical connection for the power feed to the material handler's electric panel. Electrical distribution within the handler itself will be by others. Electrical improvements include installation of new equipment, conduit, and wiring for the new material handler. Note that the work is required to be performed in a portion of the active transfer station in order to allow the Owner to continue with their facility operations in receiving sanitary solid waste from haulers and reloading the material onto the Owner's trucks for transfer to the solid waste landfill. The work shall be performed in accordance with these specifications and as shown/specified on the plans prepared by Burgess & Niple, Inc. entitled Material Handler No. 2 Installation.