Renovation of an educational facility in Ames, Iowa. Completed plans call for the renovation of a educational facility.

This project will remove and replace existing roofs at Hamilton Hall with a new 90mil membrane roof. The scope of work includes, but is not limited to, removal of existing roof, new insulation, vapor barrier, membrane, and coping flashing metals. Questions regarding the scope of work should be directed to the Design Professional. Project Information: Substantial Completion: 120 Days (Approximately March 25, 2026) Final Completion: 180 Days (Approximately May 24, 2026). Bids will be received for a single General Construction Contract. Iowa Construction Sales Tax Exemption Certificates will be provided on this project. Bid security shall be agreed upon as the measure of liquidated damages which the Owner will sustain by failure, neglect or refusal of bidder to deliver a signed contract stipulating performance of the Work in unqualified compliance with Contract Documents. Successful bidder will be required to furnish a Contract Performance and Payment Bond in the amount of 100% of the contract sum within ten (10) days after receipt of Notice of Award. No bid may be withdrawn for a period of 45 calendar days after the date of opening. The Iowa Board of Regents seeks to provide opportunities for Targeted Small Businesses in accordance with the provisions of Chapter 73 of the Code of Iowa. This project has a participation goal of 10% for certified Targeted Small Businesses as specified in the Project Requirements. By virtue of statutory authority, a preference will be given to products and provisions grown and coal produced within the state of Iowa. The Iowa Board of Regents, reserves the right to reject any and all bids, to waive irregularities and to accept that bid which is deemed in the best interest of the Owner. Question Deadline 11/04/2025 Each bidder shall examine the contract documents carefully and, not later than seven (7) calendar days prior to the date set for receipt of bids, shall make written request to the Design Professional for interpretation or correction of any ambiguity, inconsistency or error therein which may be discovered.