Renovation of a fire / police facility in Meriden, Connecticut. Completed plans call for the renovation of a one-story above grade fire / police facility.

The City of Meriden seeks the services of a contractor to furnish labor and materials to replace the boiler at Meriden Fire Station #5, 1075 East Main Street, Meriden, CT 06450. The contractor is also required to provide temporary domestic hot water while the boiler is being replaced. The specifications and drawings are intended to result in finished work that is completed, tested, and ready for operation. Work Included: The electrical work shall consist of all labor, equipment and services required to complete, ready for correct operation, all of the work called for by the accompanying drawings and these specifications. The work shall include, but is not limited to: 1. Demolition. 2. Raceways and Boxes. 3. Branch Circuit Wiring. 4. Wiring Devices. 5. Circuit Breakers. Gas systems Domestic water systems A. This contract includes all labor, material, equipment, tests and appliances required to furnish and install all plumbing as shown on drawings, implied and herein specified. B. The location of the building will be as shown on drawings. A visit to the site and examination of other Mechanical trades showing all details of construction is a requirement before submitting a proposal. C. The drawings are diagrammatic and indicate the general arrangement of piping and equipment, and do not show all minor details and fittings. Such items shall be included, as well as reasonable modifications, in the layout as directed to prevent conflict with other trades. D. Connect all equipment shown on drawings. Check all Mechanical drawings and coordinate all the work accordingly. E. Provide seismic restraints in accordance with Section 230548. A. This Contract includes all labor, material, equipment, tests and appliances required to furnish and install all HVAC as shown on drawings, implied and herein specified. B. The present location of the building will be as shown on drawings. Visit the site and examine the Mechanical trades showing all details of construction before submitting proposal. C. Connect new boilers and pumps to existing and leave ready to operate. Check all Mechanical and Electrical drawings and coordinate all work accordingly. D. Refer to Section 230548 for Seismic Restraints. E. Drawings are diagrammatic and indicate the general arrangement of piping and do not show all minor details and fittings. Such items shall be included, as well as reasonable modification, in the layout as directed to prevent conflict with other trades. A. Scope of work consists of installation of materials to be furnished under this Section, and without limiting generality thereof consists of furnishing labor, materials, equipment, hoisting, plant, transportation, rigging, staging, appurtenances, and services necessary and/or incidental to properly complete all electrical work as shown on the drawings, as described in these specifications or as reasonably inferred from either as being required in opinion of the City of Meriden. B. Work Included: Provide complete electrical services where shown on the drawings, as specified herein and as needed for a complete and proper installation including but not necessarily limited to: 1. General 2. Conduits & Raceways 3. Identification 4. Wire and Cables 5. Wiring Devices 6. Outlet Boxes, Junction Boxes, Pull Boxes 7. Supporting Devices 8. Disconnect Switches 9. Grounding. 10. Circuit Breakers. Question Date 12/03/2025 4PM