Renovation of a municipal facility in Victorville, California. Completed plans call for the renovation of a 7,300-square-foot municipal facility.

The project includes demolition and disposal of existing carpet, tile, and stair treads, surface preparation, and installation of new carpet, tile, laminate flooring, and stair treads in multiple areas throughout the facility, including offices, restrooms, hallways, conference rooms, and crew areas. All work shall be performed in accordance with manufacturer specifications, applicable codes, and City standards. The contractor shall coordinate work to minimize disruption to staff operations and complete the project within fourteen (14) working days from the Notice to Proceed. Question Submission Deadline: November 20, 2025, 12:00pm Prospective Bidders desiring an explanation or interpretation of this solicitation, plans, specifications, etc., must request it in writing via the electronic. The City reserves the right to reject any and all Bid Proposals and waive any irregularities or informalities in any Bid Proposal or in the bidding. The City of Victorville is seeking qualified contractors to provide flooring removal and replacement services at the Public Works Yard. The project involves removing existing flooring materials and installing new flooring in designated areas throughout the facility. The goal is to enhance the durability, safety, and aesthetic appeal of the building. The selected contractor will be responsible for all aspects of the project, including preparation, removal, disposal, installation, and finishing. The City will not provide measurements or quantities. Contractor shall verify all field measurements and site conditions prior to submitting a bid and shall be responsible for ordering correct quantities of materials. Detailed Specifications The contractor shall adhere to the following specifications and standards for the flooring removal and replacement project: A. Flooring Removal: 1. Remove existing flooring materials, including but not limited to carpet, vinyl, tile, and adhesive residues. 2. Ensure that the subfloor is clean, smooth, and free of debris, dust, and contaminants. 3. Properly dispose of all removed materials in accordance with local, state, and federal regulations. B. Subfloor Preparation: 1. Inspect the subfloor for any damage or irregularities and repair as necessary. 2. Ensure that the subfloor is level and meets the manufacturer's specifications for the new flooring material. 3. Apply a suitable primer or underlayment if required by the flooring manufacturer. C. Flooring Installation: 1. Install new flooring materials as specified by the City of Victorville. The materials may include but are not limited to carpet, tile, laminate flooring, and stair treads. 2. Follow the manufacturer's installation guidelines and industry best practices. 3. Ensure that all seams, joints, and transitions are properly sealed and finished. 4. Install appropriate baseboards, trim, and thresholds as needed. D. Finishing: 1. Clean the newly installed flooring to remove any installation debris, dust, or adhesive residues. 2. Apply any necessary sealants or finishes as recommended by the flooring manufacturer. 3. Conduct a final inspection to ensure that the installation meets the specified standards and quality requirements.