Site work for a golf course in Rochester Hills, Michigan. Completed plans call for site work for a one-story above grade golf course.

Reference Number 0000405186 Oakland University Golf and Learning Center is requesting proposals for replacing our current driving range turf with a new tee line system that has a tee solution. This project includes removal and disposalof the existing turf, preparation for the new turf, installation of a new artificial turf tee line system with a tee solution and putting green turf in the teaching area. Project Location: 501 Golf View Lane, Rochester MI 48309 Question Deadline 12/11/2025 at 2:00 PM ET Questions are submitted online No , any questions, please contact Maria EbnerSmith at 248-370-4423. General Requirements - Certified Payroll - Insurance Required - Prevailing Wage Required Bonding Requirements - Bid Bond 5 % - Performance Bond 100 % - Labor and Materials Bond 100 % - Payment Bond 100 % Bid security in the form of a certified check, or bid bond equal to five percent (5%) of the bid is required and shall accompany each bid. Bids shall be submitted electronically, on the forms provided, with no alterations. Bids shall remain firm for 120 days from the date of bid opening. Base bid: 280 lineal feet or 2,175 sft of turf hound standard tee line (tl-076 or similar). please include the removal & disposal of the existing turf + clean and prep for concrete for installation of new turf. Alternate 1: 400 sft of np45 putting surface (or similar) turf in teaching area. please include the removal & disposal of the existing turf + clean and prep for concrete for installation of new turf. Alternate 2: x1 full color logo's embedded in np45 putting turf (or similar) @ 1 location (either; ouglc, interlocking ou or grizz head. logo is tbd) Alternate 3: provide drainage holes @ 10' on center in existing concrete under existing range turf per exhibit A Top surface of concrete base pad should match elevation of existing grade 2. Pad slope not to exceed a half percent 3. Overall concrete pad dimensions per TurfHound schematic dimensions See dimension adjustments (next page) for perimeter TurfHound frame versus no frame perimeter pavers 4. Pour 4" standard 3,000 psi concrete slab; fiber fill optional 5. Square and clean outside edges for finish, do not roll or scallop, as it will interfere with the frame 6.Standard light broom for finish surface 7.Expansion cuts optional per your region 8. Install drain inside of pad edge 6" to 12" inside of front or back edge All work shall be substantially completed as follows: April 1, 2026