Renovation of a mixed-use development in Tampa, Florida. Completed plans call for the renovation of a medical facility.

The contractor shall provide all necessary professional services, equipment, labor, materials, supervision, tools, testing, and specialty services, including Industrial Hygienist and Asbestos Contractor, to perform a design-build project for CSI Project #673-CSI-132, "1.5T MRI ICC." The work includes site investigation, design and preparation of drawings, phase planning, specifications, construction, and installation of a new Siemens 1.5T MRI ICC system in designated hospital areas. The design-build team must include subcontractors performing professional services and deliver work consistent with the professional skill and care ordinarily provided by architects and engineers under similar circumstances. Services must be performed expeditiously to ensure orderly progress of the project. Location: James A. Haley VA Hospital, 13000 Bruce B. Downs Boulevard, Tampa, Florida, 33612. MAGNITUDE OF CONSTRUCTION: Between $2,000,000.00 and $5,000,000.00 REQUESTS FOR INFORMATION: Requests for Information (RFIs) shall be submitted by the prime contractor through email only to david.hernandez1@va.gov No solicitation questions will be accepted in any other format. Do not discuss project requirements with any Tampa VAMC technical staff during solicitation Phases I and II. The cutoff for submission of RFIs for Phase I is 12/29/2025, at 10:00 AM EST. Phase I RFI's should address Phase I evaluation factors only. If Phase II questions are asked, they will be deferred until Phase II. Send RFIs only to the Contracting Officer do not include VA technical representatives. Responses will be provided through an Amendment posted to SAM.gov in a Question & Answer format visible to all offerors The Method of Contractor Selection has not been determined at this Time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Question Deadline 12/26/2025 at 10:00 AM ET