Renovation of a municipal facility in Stratford, Ontario. Completed plans call for the renovation of a municipal facility.

Perth County is requesting tenders to supply all labour, material and equipment for the Courthouse Vault roof replacement. The work consists of the supply of all labour, material, equipment and supervision necessary to complete the work shown, or described by, or reasonably inferred from these contract documents. Without limiting the qualifications of the foregoing, the work consists of the following: Courthouse Vault Roof Replacements. All work shall be carried out in accordance with the current standards and recommendations set out by the Ontario Industrial Roofing Construction Association (OIRCA). A. Modified bituminous roofing work including but not limited to: 1. Minimum One (1) ply of 80-mil approved modified bitumen base sheet meeting ASTM D6161, Type I with bitumen. 2. Hot Bitumen (System Option 1): ASTM D312, Type III steep asphalt having the following characteristics: a. Softening Point 185F - 205F b. Flash Point 500F c. Penetration @ 77F 15-35 units d. Ductility @ 77F 2.5 cm 3. Solvent Free Cold Applied Adhesive (System Option 2): zero V.O.C., moisture cured, rubber polymer modified, non-asbestos containing cold applied adhesive for roof slopes up to 3:12. A. Non-Volatile Content ASTM D4586 100% B. Density ASTM D1475 11.2 lbs./gal. (1.11 g/m3) C. Viscosity Stormer ASTM D562 16-20 sec. D. Flash Point ASTM D93 400 F min. (232 C) E. Slope: up to 3:12 4. Base Flashing Ply: One (1) ply of 40 mil SBS base flashing ply covered by an additional layer of modified bitumen membrane and set in bitumen 5. Modified Membrane (System Option 2): 110 mil SBS and SIS (Styrene-Butadiene-Styrene and Styrene-Isoprene-Styrene) rubber modified roofing membrane reinforced with a dual fiberglass scrim and polyester mat. 6. Surfacing: Flood coat of cold applied, polymer modified, fiber reinforced bitumen (maximum VOC 250g/L), meeting class A fire rating and ASTM D1863 roofing aggregate consisting of pea gravel 7. Roofing Aggregate: To conform to ASTM D1863 a. Pea Gravel