Renovation of a detention facility in Kitchener, Ontario. Completed plans call for the renovation of a detention facility.

The Correctional Service Canada requires the services of a contractor to remove and replace three (3) existing Fulton boilers with new compatible high-efficiency boilers. This upgrade is intended to improve energy performance, reliability, and ensure compliance with current mechanical and environmental standards. Background The existing Fulton boilers were installed over 30 years ago and are at the end of their operational life span. Maintenance and repairs have become increasingly difficult due to the scarcity of replacement parts, many of which are no longer available. These boilers are critical to the institution, as they provide radiant heating to a large section of the facility. Their replacement is essential to maintain uninterrupted service and operational efficiency. Scope of Work The Contractor must: 1. Complete their own site assessment. 2. Decommission, disconnect, remove and dispose of the current boilers. 3. Supply and install three (3) new boilers, including all necessary electrical work and rigging. 4. Supply and install new system components, including control valves, hygroscopic air vents, expansion tank, venting and air intakes. 5. Supply and install new water lines, including new valves, strainers, wells and insulation. 6. Supply and install new gas lines with shut-off valves. 7. Complete a full integration of the boiler controls with the existing Building Automation System (BAS). 8. Ensure the building remains heated throughout the duration of the project. Question Deadline 01/02/2026: Address Enquiries to - Robin Riha robin.riha@csc-scc.gc.ca. Enquiries should be received no later than five (5) business days prior to the date set for solicitation closing to allow sufficient time to provide a response