Site work for a water / sewer project in Atwood, Kansas. Completed plans call for site work for a water / sewer project.

Furnishing all equipment, labor, materials and appurtenances required to construct 100 LF of 4" Water Main, 10,300 LF of 6" water main, 3,500 L.F. of 8" water main, service line, meter pits, valves, fittings and other such work as may be incidental to WATER SYSTEM IMPROVEMENTS 2025, ATWOOD. 11.00 SCOPE - Work covered by this specification consists of furnishing all labor, tools, materials, equipment and performing all operations in connection with the construction of air-entrained Portland cement concrete curbs, combined curbs and gutters, valley gutters, sidewalks and driveways, complete in place in accordance with this section of the specifications and the applicable drawings. The Portland cement concrete shall be in accordance with the latest version of KDOT Standard Specifications for State Road and Bridge Construction this section of specifications and applicable drawings. 11.10 GENERAL n This work shall consist of air-entrained Portland cement concrete constructed on prepared subgrade in accordance with these specifications. This work shall conform with the lines and grades, thickness, and typical cross-sections shown on the applicable drawing or established by the Engineer. Contractor shall provide, erect and maintain all necessary barricades, suitable and sufficient lights, danger signals, signs and other traffic control devices. He shall take necessary precautions to protect the work and to safeguard the public. Streets closed to traffic shall be protected by effective barricades and obstructions shall be illuminated during hours of darkness. Warning signs shall be provided to control and direct traffic properly. The latest revisions of the standards referred to herein existing at the time of the bid opening shall prevail. 11.20 CONCRETE - Concrete shall be constructed in accordance with these specifications, drawings and Division 500 Rigid Pavement or Division 700 Structures of KDOT Standard Specification for State Road and Bridge Construction. Concrete shall be Concrete Class A (AE) mixed aggregate MA-1 or coarse and fine aggregate constructed at the thickness and dimensions shown on the Drawings. Concrete for pavement shall be Grade 4.0 air-entrained MA-3 with a minimum compressive strength requirement of 4,000 psi for the 28-day test and for pavement a 7-day flexural strength of 450 psi with type IP cement. The materials shall conform to the requirements specified Materials Division of KDOT Standard Specifications for the State Road and Bridge Construction (2015 Edition ) and the lates