Renovation of an educational facility in Kansas City, Kansas. Completed plans call for the renovation of a educational facility.

Lighting Controller Replacement at Oak Grove Elementary The Vendor acknowledges the right of the School District to reject any or all proposals and to waive any formality or irregularity in any proposal received whenever such rejection or waiver is considered to be in the best interest of the School District. The School District also reserves the right to reject the proposal of a contractor who has previously failed to perform properly or complete contracts of a similar nature on time, or the proposal of a contractor who is not qualified in the opinion of the School District, to perform within the proposal specification. The School District reserves the right to reject a proposal if the contractor failed to furnish any required bond or security, or to submit the data required by the proposal documents, or if the proposal is in any way incomplete/irregular. A 5% bid bond is required on any proposal equal to or exceeding $100,000.00 and are due at the time the bid is awarded to the contractor by the Turner USD 202 Board of Education. No liquidated damages will apply to this project. It is the intention of the school district administration to make a decision regarding the Award of the Project by Wednesday January 7, 2026. SPECIFICATIONS Relays: Superior latching relays 1, 2, or 3 pole configurations SCCR to 18,000 symmetrical amps 40 Amps @ 120, 277, 347 VAC Lockout feature disables control from panel Switch type override control Safeguards: Power surge and spike suppression up to 123 volts on the 24VAC power input Internal memory backup and restore Real-Time-Clock time retention 45 days or greater without power Memory retention for firmware and programming up to 200 years and electrostatic discharge to 4kv Data line surge and spike suppression up to 8kv direct and 15kv thru air Physical: Controller Assembly: 12"W x 9"H High voltage barriers separate Normal/Class2 wiring Provided with pre-drilled mounting holes Double sided construction similar to PCI(R) Relay Assembly: 10.9"H x 5.37"H Electrical: 120/277 VAC @ 1 amps or optional 347 VAC Capacities: Up to 48 single pole relays 1 LS input module 1 LL Serial module Operating Environment: Location: Interior space Operating Temperature: 0 to 50 C Humidity: 10% - 90% Non-condensing Atmosphere: Non-explosive/corrosive Vibration: Stationary Certifications and Approvals: UL and CUL listed FCC Part 15 Title 24 ASHRAE compliant LEED compliant Network Controller Spec: Panel Mount: 6" Wide X 4" High Removable power connector USB connector