Site work for a water / sewer project in Pawleys Island, South Carolina. Completed plans call for site work for a water / sewer project.

Furnish, deliver, and start-up one belt press dewatering system and associated equipment as specified and in accordance with the Contract Documents. All work must comply with the specifications listed in the Bid Package and the recommended practices of the American Water Works Association (AWWA), and the South Carolina Department of Environmental Services (SCDES). The Owner reserves the right to waive any informalities in bidding and to reject all bids if it is in the Owner’s best interest to do so. A. The manufacturer shall furnish, deliver, and start-up one (1) belt press dewatering system (referred to as "system" or "belt press system" or "dewatering system") and associated equipment as specified herein and in accordance with the Contract Documents. The belt press equipment specified in this section shall be provided by a single supplier to ensure coordination and compatibility of equipment. B. The belt press manufacturer is advised to familiarize themselves with the overall plant process in order to evaluate the compatibility of the manufacturer's equipment to dewater the particular sludge generated. C. The manufacturer shall provide one (1) complete Belt Press dewatering system as specified herein. The system shall include the following: belt press, polymer system, control panel, water supply booster pump, discharge chute, and totalizing flow meter. The belt press system must be complete and integrated such that it can operate in a fully interlocked manner while achieving the performance requirements as specified in this document. D. The dewatering system shall be designed to thicken and dewater wastewater sludge by means of a belt press with a 3-belt design. The connected ancillary equipment shall be supplied by the Belt Press Manufacturer to ensure system compatibility and system responsibility.