Renovation of an educational facility in Pueblo, Colorado. Completed plans call for the renovation of a educational facility.

**As of March 9th,2026 the project was awarded to but the awarded amount is not available.** Reference Number 0000411075 Purchase Type One Time Only- Delivery Date: June 2026 Pueblo School District 60 is seeking competitive proposals from qualified, reliable vendors to replace the roof at Hyde Park School. Question Deadline 02/06/2026 at 4:00 PM MT Questions are submitted online No, Questions concerning this RFP and the procedures for responding to the RFP should be directed in writing, e-mail or fax only, to: Kassandra Naylon, Purchasing Manager Pueblo School District 60 315 W. 11th St. Pueblo, CO 81003 Phone: 719-253-6404 Fax: 719-253-6406 E-mail: kassandra.naylon@pueblod60.org Pueblo School District 60 is seeking competitive proposals from qualified, reliable vendors to replace the roof at Hyde Park School, located at 2500 W 18th St, Pueblo, CO 81003 The successful vendor will be responsible for removing and disposing of the existing roof system, providing the new roof system, hazardous materials remediation, and all engineering, design, labor, supervision, materials, equipment, transportation, and services necessary to perform high quality work as further described in the Scope of Work. Notice of Award February 24, 2026 (tentative) Pueblo School District 60 is seeking competitive proposals for the design, engineering, purchase, delivery, and installation for full roof system replacement. 1. Contractors will conduct a pre-bid site visit and gather information for the development of a Work Plan. As part of the Work Plan and construction activities the Contractor will identify and comply with all applicable federal, state and local statutes. The Contractor will also comply with applicable terms and conditions of the contract. 2. The finalized Work Plan and interval construction schedule will be submitted to the District's Project Manager for review and approval prior to the start of construction. The Project Manager will provide to the Contractor any existing drawings/specifications relating to the project. 3. All work must be performed during regular non-school hours and days, with the exception of school breaks. 4. The Contractor will mobilize construction forces necessary to begin the project within ten (10) business days after approval of the Work Plan and construction schedule by the District. 5. The Contractor will arrange for the following as needed: a. A secure staging area for storing equipment, materials, tools, and supplies, as the Contractor shall have sole liability for said items, and b. Access to and provision of utilities as needed for design and construction. 6. The following documents, plans, and reports will be provided to the Project Manager: a. Work Schedule and short interval schedule to include daily and weekly activities b. As-built drawings at the end of the project c. Hazardous Waste Disposal Certificates as requested or required, including all hazardous materials abatement/disposal plans needed for the project, and d. Inspection Reports as completed. 7. The Contractor will immediately notify the Project Manager of any and all issues that may result in a project delay and/or impact work quality or safety. 8. The Project Manager must be informed of and approve all work done by subcontractors; however, the District will deal only with the Contractor regarding work done and costs incurred by subcontractors. 9. The Contractor will provide all labor, materials, equipment, accessories, etc., required for the design, purchase, delivery, and installation for a partial roof system replacement. All materials and equipment furnished for this job shall be in current production and shall be of quality material. Used, shopworn, demonstrator, prototype, reconditioned, or discontinued equipment or materials are not acceptable. 10. All work will be performed in accordance with current applicable building, plumbing, electrical, and HVAC codes. The Contractor will be responsible for obtaining all necessary permits. 11. The Contractor will provide information and assistance with incentives (green initiatives) and/or rebates and credits that may be offered by manufacturers, utility companies, state and/or federal agencies. 12. All goods and/or services shall comply with applicable OSHA regulations in effect at the time goods are shipped and/or the service is performed. Safety Data Sheets (SDS) are required in accordance with applicable regulations. SDS must be left on site immediately after goods and/or services have been provided. 13. All installations will be in accordance with manufacturer's recommendations. 14. The Contractor is responsible for removing all construction and packing debris from the work site and keeping a clean, safe work area at all times. Clean up of the work area shall be at no additional cost to the District. If hazardous materials are encountered during execution of the contract, the Contractor will be responsible for removing and disposing said materials in accordance with federal, state and local statutes and codes. The Contractor will provide the Project Manager with appropriate documentation regarding the disposal of said hazardous materials as requested or required. 15. Safety signs, barricades, and/or other materials will be erected by the Contractor to warn patrons and staff away from work areas. Safety of public, district staff and contractor's employees shall be a priority and shall be the responsibility of the Contractor. 16. The Contractor must notify the Project Manager in advance of work that may be disruptive to the normal school operations and parking lot traffic flow. Any shutdown of service and/or utilities must be approved and scheduled with the Project Manager. The Contractor is responsible for providing written documentation to the Project Manager for any work that may affect the District's warranties or existing equipment (for example: roof penetrations). The written documentation must be provided and approved prior to the commencement of work. 18. The Contractor will be held liable for the cost of repair or replacement of structures, utility systems and any other parts of the facility damaged by the Contractor's acts of negligence or lack of full adherence to the requirements of the Scope contained herein. The Contractor will be held liable for the cost of repair or replacement of building components and/or vehicle(s) damaged by falling/flying equipment and/or debris. 19. Warranties for materials, labor, and equipment will be issued in accordance with industry practice. Extended warranties may be requested by the Project Manager as cost and budget allow. 20. The Contractor will respond to inquiries within twenty-four (24) hours and will service any non-working units on the day of the call during the warranty period. The District will not be responsible for any additional costs to repair or replace new equipment or parts that are still under warranty; the Contractor is responsible for all liability. 21. Unless otherwise specified, the Contractor shall unconditionally guarantee the labor and the materials used in performance of this contract within the specified guidelines and recommendations of the manufacturer's warranty. If any defects or signs of deterioration are noted which in the District's opinion are due to faulty workmanship or materials, the Contractor shall be notified and shall make the necessary repairs to correct any deficiency in the system at the Contractor's expense. SPECIFICATIONS o Completely remove existing roof(s) down to roof deck substrate. o Install single layer of Type G-2 Base Sheet nailed to nail-able decks. o Install R-30 rigid Polyisocyanurate Insulation, mechanically attached to metal roof decks, set in hot asphalt adhesive to type G-2 Base Sheet. o Install Tapered PolyIso Crickets and Taper Systems as required to acquire positive drainage to existing roof drains / scuppers. Set in hot asphalt adhesive. o Install 1/2-inch High Density Fiberboard set in hot asphalt adhesive. o Install 4-Ply, gravel surfaced, Asphalt Built-up Roofing complete with all related 2-ply SBS base wall and curb flashings. o Base flashing Laps must be 5-coursed with mastic and membrane. Coat all base flashings with Karnak Aluminum Fibered Coating. o Replace all sheet metal Cap Flashings, Counter Flashing, Gutters, Scuppers, Conductor Heads, and Downspouts with new 24-guage, Kynar 500 prefinished sheet metal (Standard Manufacturer Color) o Lift and reset all roof top penetrations as necessary to maintain a minimum 8-inch curb base flashing height. o Provide School District with 20-Year NDL Warranty w/90 mph wind speed coverage. o All work to be self-performed by Roofing Contractor Employees. No Sub-Contract Roofer Labor will be Allowed Pueblo School District 60 is seeking competitive proposals from qualified, reliable vendors to replace the HVAC system at Hyde Park School Pueblo School District 60 is seeking competitive proposals from qualified, reliable vendors to replace the HVAC system at Hyde Park School. Bonding Requirements - Performance Bond 100 % - Payment Bond 100 %