Renovation of a municipal facility in Lewisburg, Tennessee. Completed plans call for the renovation of a municipal facility.

Marshall County, Tennessee is requesting bids for Hardison Annex Door Replacement in the Marshall County Hardison Building, Lewisburg, TN. Bids will be accepted by the Marshall County Budget Office. A mandatory walk-through will be conducted at the Courthouse Annex Building. Detailed specifications and bidding instructions may be obtained from the Budget Office. Marshall County reserves the right to reject any or all bids and waive any formalities. Marshall County is an equal opportunity provider and employer. The contractor shall furnish all labor, materials, equipment, and supervision necessary to remove existing exterior assemblies and to provide new commercial hollow-metal door systems at all designated locations. All work shall be completed within existing openings unless otherwise noted. Project to be completed during normal business hours. All components shall meet applicable local building, life-safety, and ADA requirements. All components shall be commercial-grade, exterior-rated, and equivalent to or approved equal to the specifications herein. Door Locations Include: o Main Entrance o Side Entrance o Rear Entrance o South Exit Door Assemblies- All Locations Hollow Metal Doors: o 16-18 gauge hollow metal construction o Single and paired doors as required o Nominal size: 36" x 84" unless custom sizing is required o Exterior-rated, heavy-duty commercial use o Vision panels approximately 5" x 30" where indicated o Factory-primed or prefinished o Equivalent or approved equal Frames Hollow Metal Frames o 16-18 gauge hollow metal o 1" nominal jamb faces o 1-5/8" to 2" nominal header faces o Frames with sidelights where required o Installed within existing openings o Equivalent or approved equal Glazing & Sidelights o Clear tempered safety glass o Vision kits approximately 5" x 30" o Sidelight glazing where required o All glazing shall comply with applicable codes o Equivalent or approved equal Hardware- All Doors o Heavy-duty commercial hinges (ANSI/BHMA Grade 1 or 2) o Surface-mounted hydraulic door closers, aluminum finish o Rim or vertical rod exit devices, 36" x 84" nominal