Renovation of a municipal facility in Miami, Florida. Completed plans call for the renovation of a municipal facility.

Bid documents shall be distributed following the mandatory pre-bid meeting. Contractors must attend meeting to obtain plans and specs Scope of Work shall include, but not be limited to: Provide all labor, equipment and materials to renovate the 4th floor Concourse “D” lost and found office at Miami International Airport including: new millwork, new glass partitions, mechanical, electrical outlets, lighting, sprinkler heads, flooring and acoustic ceiling. Contractor shall review all documents and scope of work provided by Miami-Dade Aviation Department (MDAD) for work to be completed. Contractors must agree to perform all work in accordance with the scopes of work established by MDAD, the MCC 7360 contract’s terms and conditions, all required permits and inspections and all applicable federal, state and local laws, codes and regulations. Please refer to the Plans & Specs for further description of the scope of work. All potential bidders are hereby notified that bids for this project must reflect a lump sum amount. The lump sum amount shall be indicated on the MCC-7360 Attachment 5A Bid Form. All quantities provided with the bid documents are estimated quantities based on the project scope of work. It is the bidder’s responsibility to confirm any and all estimated quantities or amounts reflected on the bid documents to generate a responsive and responsible bid. Errors, omissions and/or discrepancies in quantities shall be brought-up to the attention of the MDAD team via the request for information (RFI) process during the bidding phase. Failure to confirm estimated quantities shall not constitute grounds for subsequent change orders. Bidders are responsible for all costs related to permitting, preparation of required shop drawings, special inspections, preparation of as-built drawings, close-out documentation and/or any engineering certificates required. Bid Documents must be submitted in a sealed envelope. The bidder’s name, address, the project name and the RPQ number must be indicated on the outside of the envelope. The sealed envelope shall include, at a minimum, the following documents: 1. Bid price using Bid Form-Attachment 5A. 2. Bid guarantee in the form of a bid bond, certified check, or cashier’s check. Failure to include a bid bond/guarantee shall render the bid non-responsive. 3. Fully executed Affirmation of Vendor Affidavits and Collusion Affidavit. 4. Any and all applicable Addenda documents (fully executed and dated) issued during the bidding phase.