Renovation of a laboratory facility in Jefferson City, Missouri. Completed plans call for the renovation of a laboratory facility.

Accepting Sealed Bids For Lincoln University - Frank Hall Lab Renovations - LU25005. Plans And Specifications For The Project May Be Requested From The Office Of Facilities And Planning. A Pre-bid Walkthrough For The Project Will Be Conducted At Frank Hall. Attendance At The Pre-bid Conference For Instruction Is Mandatory For Each Bidder Submitting A Proposal. Lincoln University Of Missouri Is Seeking Qualified Contractors To Provide Comprehensive Renovation Services For Laboratory Facilities Located In Frank Hall. The Project Includes Renovation Of Approximately 18 Laboratory Spaces, Including The Replacement And Installation Of 14 Laboratory Fume Hoods, Along With Associated Infrastructure Upgrades. The Intent Of This Project Is To Modernize Laboratory Environments, Improve Safety And Code Compliance, Enhance Functionality, And Extend The Useful Life Of The Facilities. A. Hazardous Materials Abatement o Provide A II Labor, Materials, Equi Pment, Test'ing, Containment, A Nd D Isposal Req Uired For Asbestos Abatement Within Identified Laboratory Areas. o Coordi Nate Pre-abateme Nt Surveys, A I R Monitoring, A Nd Clearance Testing. o Ensure Compliance With All Federal, State, And Local Environmental Regulations. o M Aintain Proper D Ocu Mentation And Disposal Man Ifasts. B. Mechanical Electrical. And Plumbing (HEP) Upgrades Contractor Shall Provide Complete MEP Improvements Necessary To Support Modern Laboratory Operations, Including: Mechanical: o HVAC Upgrades Supporting Laboratory Ventilation Requirements. o Integration And Commissioning Of Laboratory Exhaust Systems For Fume Hoods. o Balancing And Controls Integration. Electrical: o Power Distribution Upgrades Supporting Laboratory Equipment And Fume Hoods. o Lighting Replacement/upgrades Where Required. Plumbing: o Laboratory Gas, Water, Waste, And Specialty Piping Modifications As Required. o Connection And Commissioning Of Lab Sinks, Safety Equipment, And Fume Hood Utilities. C. Laboratory Fume Hoad Installation o Furnish and install approximately 14 laboratory fume hoods. o include associated ductwork, controls, exhaust systems, and commissioning. o Coordinate with MEP upgrades to ensure proper performance and certification. o Provide testing, balancing, and certification documentation. D. InteriorArchitectural Renovations Flooring: o RemoveI of existing flooring as required. o Installation of laboratory-appropriate flooring systems (chemical resistant, slip resistant where applicable)>> Ceilings: o Replacement of ceiling systems including grid, tiles, lighting integration, and access panels as needed. Walls and Painting: o Surface preparation, patching, and painting of laboratory spaces. o Use coatings appropriate for laboratory environments. Casework and Countertops: >> Furnish and install laboratory casework, cabinetry, and countertops. o Materials shall meet durability, chemical resistance, and institutional standards. a 3. General Requirements o Maintain continuous coordination with university stakeholders throughout the project. o Provide detailed project schedule, phasing plan, and safety plan. o Comply with all applicable codes, OS HA standards, and university design guidelines. o Minimize disruption to campus operations. o Provide warranties, operation manuals, and closeout documentation.