Site work and paving for a road / highway in Farmingdale, Maine. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Farmingdale Select Board is Not Obligated to Accept Any Bid, and May Reject Any or All Bids. A bid bond is not required for this project Scope of work to be performed by the contractor: Roads to be paved: o Sheldon Street - 2,543 ft. o Brookview Lane - 304 ft. o Grant Street - 1,136 ft. o 3,983 Road feet total All the streets and roads will need to be milled /ground to at least 2 inches. Specifications: o All old Asphalt shall be Milled /Ground 2 inches (2") o All reclaimed asphalt will be disposed of by the Contractor o Minimum Width of Asphalt Pavement shall be 20-22 feet and the cross slope shall be 1/4 " per foot o Tack coatings shall be applied between milled asphalt to MDOT Specs. o Contractor will follow the town of Farmingdale's code of ordinances on paving Chapter 3 Sec. 3- 109 o The Course of Asphalt shall be 12.5 mm with the surface being two inches thick (2") after compaction. o Contractor shall cut and or grind all joints where new pavement matches existing pavement at Intersections and driveways. All driveways shall be matched to the pavement of not less than 1 foot of the Apron into the driveway whether paved or gravel. o The Contractor shall provide all vehicles and equipment along with flaggers and materials to safely complete the project. o Road shoulders shall be matched to the new roadway and the shoulders itself with Quarry Gravel. *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com.