Demolition, site work and renovation of an industrial development in New York, New York. Completed plans call for the renovation of a industrial development.

This project involves major renovations across NYCHA Developments, including building systems, and site and ground improvements, through a single, integrated project. Required trades for the project include plumbing, site work, demolition, fencing & gates, and electrical. The project has a Project Labor Agreement (PLA), with goals of 30% NYC MBE/WBE participation, 15% NYC MBE, and 15% NYC WBE. Service-Disabled Veteran-Owned Business (SDVOB) and Disadvantaged Business Enterprise (DBE) goals are 0%. Subcontractors and suppliers are sought by the prime contractor. This project description is a general summary only, is not a complete listing of work required under this Contract, and does not limit Contract work as stipulated in other parts of the Documents. The Contractor is responsible for every part of the Work indicated in the Contract Documents whether or not it is included in the following summary. Refer to all parts of the Contract Documents for the total work included in this Contract. In general, the Work shall consist of performing and providing the following in accordance with the Contract Documents. C. Local Regulations: Conform to regulations of public agencies, including any specific requirements of the city and/or state of jurisdiction. D. Bidders may gain access to the work area for inspection purposes by visiting the Management Office. E. Structural Safety during Construction Operations: All removals must be in accordance with the requirements of current applicable code and other code sections pertaining to structural safety during construction. No work can begin until the requirements of these sections are met, and the ongoing requirements must be maintained continuously during construction. F. Hazardous Materials Abatement: 1. Asbestos Abatement: All ACM is to be abated in accordance with hazardous material drawings, specifications, applicable laws and regulations. Where materials are scheduled for removal, such removal and disposal of materials shall be treated as abatement. Asbestos containing materials identified in the environmental testing report shall not be impacted by the design scope of work. 2. Lead-Based Paint Abatement: All lead based paint is to be abated in accordance with hazardous materials drawings, specifications and applicable laws, including Local Law 1 of 2004 (LL1/04). Where items containing or coated with lead based paint are scheduled to be removed and replaced, such removal and disposal shall be treated as abatement.