Site work, paving and new construction of a mixed-use development in Chino, California. Working plans call for the construction of a transportation facility; and fire / police facility.

**As of 04/24/26 The Prado project has been canceled, per the owner, during local government regulatory review. We expect it to go out to bid in about 6 months. Project comprises labor, material and services necessary for major components of Project Work. This includes necessary ground improvements, grading and drainage, helicopter landing pads, above ground fuel storage and dispensing facilities, fire suppression, asphalt paving, sidewalks, curbs, general parking and accessible parking, landscaping, lighting, solar power carports, fencing, utilities including water, sewer, electrical power including generator, natural gas, telephone cabling/installation, radio cabling/installation, and associated appurtenances. Ground improvements are required at the electrical/generator building, garage, and hangar buildings. License required to bid the project: A, B or C-10. Refer to Document 00 22 00, Supplementary Instructions to Bidders, Subparagraph 2.1.3 and 2.1.4, regarding performance of work of a Fire Protection specialty contractor license classification C-16. Certificate of Reported Compliance (CRC) - Fleet Vehicles: As a condition of Contract award, prior to Contract execution, Contractor shall submit copies of the valid CRCs for any fleet retained by the Contractor or any listed Subcontractor, for which any vehicles subject to the California Air Resources Board In-Use Off-Road Diesel Fueled Fleet Regulations, Section 2449(i), Title 12, California Code of Regulations, are used in the completion of the work included in the Contract. Contractor and all subcontractors shall abide by all health and safety mandates issued by federal, state, and local governments and/or public health officers as well as those issued by DGS, and worksite specific mandates. If multiple mandates exist, the Contractor and subcontractors shall abide by the most restrictive mandate. Costs associated with adhering to health and safety mandates are the responsibility of the Contractor. Contractor is responsible for the tracking and compliance of health and safety mandates and may be audited upon request. Successful bidder shall furnish payment and performance bonds, each in the amount of 100 percent of the Contract price. Prospective bidders must attend the mandatory prebid site inspection tour. Attendance for the entire inspection is required in order for bidders to be eligible to submit a bid.