Site work for a civil project in Ocala, Florida. Completed plans call for site work for a water / sewer project.

The City of Ocala Electric Utility requires plumbing services to connect the Shaw Substation control house to the City's newly installed sewer force main system. The work includes installation of a complete grinder pump station and associated piping, power connections, and all materials, labor, and permitting necessary to deliver a functional system. Scope of Work The City of Ocala Electric Utility requires plumbing services to connect the Shaw Substation control house to the City's newly installed sewer force main system. Work includes installation of a complete grinder pump station and associated piping, power connections, and all materials, labor, and permitting necessary delivering a functional wastewater connection. This work supports the conversion from the control house's existing drain field to the new sewer system. The distance from the substation's existing sewer lateral to the City's new sewer line location is approximately 80 feet. The City is arranging the force main extension. Contractor will be responsible for connecting the control house to that force main and installing the grinder pump system. LICENSING AND EXPERIENCE REQUIREMENTS Licensing Requirement: Bidder must be a licensed as a Plumbing Contractor in the State of Florida to submit a bid for this project. Experience Requirement: Bidder must possess five (5) years' experience in providing installing grinder pump systems and force main piping. The City of Ocala reserves the right, where it may serve the City's best interest, to request additional information or clarifications from bidders/proposers, or to allow corrections of errors or omissions. Contractor agrees, as a condition for submitting a bid, that the Work will be substantially completed within 90 day(s), and completed and ready for final payment in accordance with the Agreement within 90 day(s) after substantial completion. Question Deadline 05/11/2026 at 4:00 PM CT Project Summary: Contractor will be required to perform the following services for the City of Ocala: a) Furnish and install a 1 HP grinder pump station with shutoff head (acceptable systems: E/One grinder stations or Liberty Pumps PRG Series). b) Provide and install the pump, wet well station, and control panel/box c) Excavate, and place and set the station per manufacturer requirements. d) Work in coordination with OEU to connect the station to the provided power source required for full operation at factory recommended performance levels. 2. Piping and System Configuration: a) Install 2-inch force-main service piping from the grinder pump station to the City lateral tie in point, consistent with the distance of approximately 80 ft. b) Complete the physical connection of the grinder pump discharge line to the City's new force main. c) Provide all materials, valves, fittings, bedding, backfill, and compaction required for complete installation. d) Ensure compliance with City standards, manufacturer specifications, and all applicable plumbing codes. 3. Testing & Commissioning: a) Conduct pressure testing of the force main piping. b) Function test the grinder pump system, controls, and alarms. c) Verify electrical performance with the coordinating electrician. d) Restore all disturbed surfaces to pre-construction condition. 4. Deliverables: a) Fully installed and operational grinder pump system. b) Completed 2-inch service connection to City sewer lateral. c) Test reports (pressure test, functional testing). d) Maintenance manual and equipment documentation.