Site work and paving for a road / highway in Baldwin, North Dakota. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Proposed Work Consists of 12.5600 Miles of Milling, Hma Overlay, Seal Coat, and Incidentals Located Cmc 0848, Near Jct Nd 1804 E to US Hwy 83 (Moffit) And Involves Approximately: 1 L Sum Contract Bond; 9334 Gal Tack Coat; 181769 Sy Milling Pavement Surface; 181793 Sy Seal Coat; 20197 Ton Superpave FAA 45; 1 L Sum Hma Intelligent Compaction; 408 Ea Cored Sample; 404 Ton Patching; 1212 Ton Pg 58s-34 Asphalt Cement; 1 L Sum Mobilization; 500 Mhr Flagging; 2525 Unit Traffic Control Signs; 4 Ea Portable Rumble Strips; 50 Ea Delineator Drums; 150 Ea Tubular Markers; 100 Ea Stackable Vertical Panels; 250 HR Pilot Car; 49038 Lf Short Term 4in Line-type Nr; 181680 Lf Pvmt Mk Painted 4in LINE; 28 Lf Pvmt Mk Painted 24in LINE. Bid Range $3,000,001 to $3,500,000 Prequalification is required for all bidders submitting a bidding proposal form. Prequalification is required annually. Prequalified contractors who wish to renew their prequalification must submit a complete "Contractor's Prequalification Statement" by July 1 of each calendar year. Bidders who are not currently prequalified must submit a complete "Contractor's Prequalification Statement" at least 10 business days prior to the date of the bid opening. Information is available from the Construction Services Division of the North Dakota Department of Transportation. Contractor's License--A contractor is not required to have a license from the state of North Dakota before bidding on any project, however, no contract will be awarded unless said contractor holds a current North Dakota license in the class within which the value of the contract falls. The right is reserved to reject any and all proposals, to waive technicalities, or to accept such as may be determined to be for the best interests of the state. NDDOT - 25028 - Milling, HMA Overlay, Seal Coat, and Incidentals - CMC 0848 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.