Site work for a sidewalk / parking lot in New Oxford, Pennsylvania. Completed plans call for site work for a 115,300-square-foot sidewalk / parking lot.

Sealed bids or proposals will be received for seal coating, crack filling, and line painting on two parking lots totaling approximately 115,300 square feet. Crack Sealing Application Method : Hot -applied rubberized crack sealant . Clean and rout all structural cracks (typically 1/4 inch or wider ) using compressed air or a heat lance to remove moisture and debris prior to filling . Apply hot pour rubberized sealant flush with the adjoining pavement surface . C. Sealcoating (Two - Coat System ) First Coat (Hand -Applied ): The first coat of commercial -grade asphalt emulsion sealer must be applied by hand using a squeegee method to firmly push the material into the pavement pores and ensure maximum adhesion . Second Coat (Spray -Applied ): Following the proper curing of the first coat , a second coat of sealer shall be spray - applied to provide a uniform , aesthetically consistent top finish . Materials must meet standard commercial specifications and be mixed with appropriate sand loads and latex additives for traction and durability as recommended by the manufacturer . D. Striping and Numbering Layout : Restripe all existing parking stalls , directional arrows , stop bars , crosswalks , and fire lanes to exactly match the current layout unless otherwise directed . Numbering : Stencil and paint sequential numbers on all parking spaces as directed by the District . ADA Compliance : Ensure all handicap - accessible spaces and access aisles are painted in accordance with current ADA requirements , including blue backgrounds and proper hatching . Material : Use premium , commercial -grade , fast -drying traffic paint (water - borne or solvent -based as applicable )