Site work, paving and outdoor lighting for a civil project in Upper Merion Township, Pennsylvania. Completed plans call for site work for a road / highway; for paving for a road / highway; and for outdoor lighting for a road / highway.

The description and location of the project is as follows: For the periodic inspection, repair, replacement, cleaning and maintenance of existing highway sign, bridge systems and high mast lighting systems on various state route in Bucks, Chester, Delaware, Montgomery and Philadelphia Counties, Commonwealth of Pennsylvania, Group - LIG. For the furnishing and installation of luminaries the replacement of high pressure sodium lamps, L.E.D. fixtures and luminaires, navigation lighting, electrical power supplies and associated equipment and materials. The replacement of light poles and system that have been knocked down, the installation of ballast kits, the inspection and servicing of luminaries, and trenching for the repair and replacement of conduit and wire as required. Locations: Penndot owned lighting infrastructure along various Routes in District 6-0 including; Bucks County I-95, I-295 & US1 Chester County US 30, US 202 & US 422 Delaware County I-95, I-476, PA 291 & PA 420, Montgomery County I-76, I-476, US 202 & PA 309, and Philadelphia County I-95, I-76, 63 Woodhaven Rd, Broad Street, Rte1 Roosevelt Blvd, and Gustine Lake Interchange. Project Cost Range: $15,000,000.00 - $19,999,999.99 Federal Project Status: Non - Federal (100% State) Structure Work: 0.00% Pre-Bid Meeting: None Wage Rates: Yes Prequalification Requirement: Yes State Type of Work: Roadway and Navigation - Lighting Rehabilitation Responses to questions on this page are for informational and clarification purposes. Official changes to the proposal will be made via an Addendum. The deadline for submitting questions is 72 hours before the let date and time. For Emergency projects, the deadline is reduced to 19 hours before the let date and time. PADOT - Highway Lighting Maintenance 2027-2029 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.