Site work and paving for a road / highway in Wichita Falls, Texas. Completed plans call for site work for a road / highway.

The concrete shall be uniform, workable and of a consistency acceptable to the City Engineer or designee. The cement content, maximum allowable water/cement ratio, the desired and maximum slump, the proper amount of entrained air and the strength of requirements for all classes of concrete shall conform to the requirements of these specifications. It is the responsibility of the Contractor to provide concrete meeting these requirements. During the progress of the work, the City may cast test cylinders or beams, perform slump and entrained air tests and will make temperature checks, as required, to insure compliance with the specifications. Specimens will be tested in accordance with established testing procedures. If the required strength or consistency of the class of concrete being produced cannot be secured with the minimum cement specified or without exceeding the maximum water/cement ratio, the Contractor will be required to furnish different aggregates, use a water reducing agent, an air entraining agent or increase the cement content in order to provide concrete meeting these specifications. Question Deadline 06/11/2026 All questions about the meaning or intent of the Contract Documents are to be directed to the Engineer. Questions received less than five days prior to the date of opening of bids may not be answered. alex.sandstedt@wichitafallstx.gov The Engineer's Estimate of Probable Cost of Construction for this project is $600,000.00 This project is generally described as the seal coat surface treatment of various City streets, and associated work. Contractors are strongly urged to attend and participate in the pre-bid conference at Memorial Auditorium, Engineering Department, Room 1A01, at 2:00 PM on the 8th day of June, 2026. Representatives of the Owner and the Engineer will be present to discuss the project. Engineer will transmit to all prospective Bidders of record such addenda as Engineer considers necessary in response to questions arising at the conference.