Demolition, site work and new construction of a playground / park / athletic field in Greenfield, Tennessee. Completed plans call for the demolition of a playground / park / athletic field; and for the construction of a playground / park / athletic field.

Furnish all material, equipment, supplies, and labor necessary to remove the existing playground and install a new commercial playground at Big Cypress Tree State Park. Order the project by square footage. Hard copy sets of specifications are available for purchase, or files may be downloaded for free from the online plan room. For questions about accessing the documents, contact Memphis Reprographics at 901-590-4862. Question Deadline 06/22/2026 at 2:00 PM CT All questions must be submitted Online. 1. The Contractor shall prepare designated playground area for installation of new equipment. This includes removal of existing playground, topsoil, grade work to level site, and a four (4) inch gravel base. The site shall have a one percent (1%) slope to allow for proper drainage. The Contractor shall compact any fill-in areas appropriately. 2. The Contractor shall provide and install composite multi-level tower playground structure consistent with the attached site plan. 3. The Contractor shall provide and install a four (4) seat swing frame, that is eight (8) feet high. 4. The Contractor shall provide and install an ADA full ramp system providing accessible entry. 5. The Contractor shall provide and install ancillary play components including Custom Triple Tower Wackle, Custom Sign, ADA Full Ramp, Custom Swing, Agora Bench and associated play features as reflected in the attached site plan. 6. The Contractor shall provide and install approximately 58 pieces of twelve (12) inch plastic playground border system. 7. The Contractor shall provide and install approximately two thousand six hundred and forty (2,640) square feet of engineered wood fiber (EWF) surfacing at twelve (12) inch compacted depth with one (1) layer of filter fabric, in accordance with manufacturer and safety standards. The EWF shall conform with ASTM F2075, ASTM F1292, and ASTM F1951 standards. 8. The Contractor shall install all support posts encased in concrete per manufacturer requirements. 9. The Contractor shall provide a complete installation including equipment assembly, surfacing placement, finish grading, and final site cleanup. 10. Final layout orientation and placement within the approved footprint shall be confirmed at the pre-construction meeting.