BLOCK PAGE!!!

Get Full Details

Privately Funded

Bidding Soon

Documents Available

Publicly Funded

Addenda Available

Post-Bid

Saving Project...

Published July 22, 2026 at 8:00 PM

Updated July 30, 2026

Site work and renovation of an educational facility in Glendora, California. Completed plans call for the renovation of a educational facility; and for site work for a educational facility.

The scope of work includes cleaning, preparation and application of an acrylic coating rooftop building identification lettering throughout entire campus. All lettering shall be of uniform size, style, color and surface finish (sheen), and shall be applied over Citrus College provided stencils only. 1. Summary: In accordance with the provided Building Lettering Location Site Plans, and applicable stencil layouts, apply acrylic coating letters of uniform color and surface finish. For each existing roof system type that will receive new lettering, consult applicable Roof System Manufacturer's Technical Department to confirm, in writing, that the specified (scheduled ) paint / coating-based material is fully compatible with the Manufacture's surfacing material and/or membrane. 2. Work Description: a. Properly prepare surface of existing roof system at entire area where new letters will be applied. All cleaning shall be performed by means of hand-washing surface of roof. Remove all loose dirt, debris and all accumulations of adhesive, bitumen , sealant / caulking, coating or any other irregularities so as to produce a clean, smooth surface. i . Over the clean, prepared existing roof system surface, position stencil at pre-determined location as identified by the Citrus College Representative. Stencil shall be secured (held) in-place by means of weighted ballast only. Use of fasteners, adhesive, mastic, tape etc. will not be allowed for securing stencil to existing roof system surface. ii . To avoid potential coating "bleed-through" under stencil , apply a uniform, tooled bead of Sikaflex 1a, or pre-approved single component, urethane-based sealant at inside edge of entire stencil opening (lettering outline) with a bond breaker against the stencil. Sealant must be completely dry (cured) prior to base coat application of acrylic coating. Campuswide roofing tearoff and replacement project requiring Class C39 license. Bonds: Performance Bond required (unspecified amount), Payment Bond required (unspecified amount). Online Q&A Yes Q&A Deadline 07/30/2026 2:00 AM (PDT)

Sub-Bidding

$1,500,000.00

Public - State/Provincial

Subscribe For Documents

No Data

Subscribe for All Details

Trades Specified

Division 00 - Lorem Ipsum

Division 00 - Lorem Ipsum

Lorem, Ipsum, Dolor, Sit amet

Find More Local Projects

Within 75 Miles of This Project
677
Active Projects
196
Bidding Soon
3,783
All Active Projects
0
Updated Recently

You’ve Reached the Free View Limit

Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.

Come back in [[refresh_days]] to get [[project_count]] more free projects.

August 4, 2026

October 5, 2026

Project location map

1155 W Foothill Blvd, Glendora, CA

Related To This Project


Recently Viewed

Fuel growth with access to the bidding project info your business needs.

Full details, including key contact information, important dates, plans and specifications, on over 500,000 Projects including 5000 updated daily available to subscribers.