Site work for a water / sewer project in Tetlin, Alaska. Completed plans call for site work for a water / sewer project.

Installation of well and septic services to a single residence in Tetlin, Alaska, including all labor, materials, equipment, and services. Purpose The purpose of this project is to provide well and septic services to a select residence in Tetlin, Alaska. Tasks and Payment Description 1. All work for the following tasks shall be performed in accordance with the attached plan sets and specifications. 2. Price shall include all costs associated with the project-based installation requirements. 3. Plan Set /site plans may not reflect the actual quantities (depths/lengths, etc.) that will be needed to complete the project. Quantities referenced are estimates only. 4. ANTHC does not guarantee a minimum or maximum quantity for any of these items. If the actual quantities (depth or length, etc.) do not meet or exceed the contract amount, the contract will be modified to the actual amount. Water System Installation Services W1. Well Drilling – Steel Casing - a. Contractor is to drill and develop an insulated residential Arctic Water Well. Should well depth exceed this depth, the Contractor must contact the Project Officer/Project Manager in writing (via email) to obtain written approval , prior to any additional drilling. b. Compensation may include payment for labor, drilling, steel casing, PVC liners, well logging, alignment test, drive shoes, sanitary well cap and marking, well development (items not included under test pumping) and other necessary items required for well drilling. c. Payment for well drilling as specified shall be made at the unit price bid based on the actual number of linear feet drilled. d. No payment shall be made for well drilling not authorized by the Project Officer/Project Manager. No payment made for well(s) that need to be abandoned due to Contractor errors. W2. Well Screen a. Contractor is to provide well screen sizing, sizing methodology and install well screen on developed well. 1. The size of the slot shall be based on the sieve analysis of the water bearing formation. 2. Well screens shall not be installed without proper sizing. 3. Sized to yield suspended solids concentrations less than 5ppm after development. 4. Minimum specified screen length is 5 feet. The length of the screen shall be dependent upon the length and type of aquifer encountered and minimum specified production rate. b. Compensation may include payment for labor, packers, seals , couplings, blank risers as bottom and top sections, fittings, and all other necessary items required for complete and operational installation. c. Payment for well screen as specified shall be made at the unit price bid based on the number of linearfeet of open slot screen installed Bidder shall submit all questions about the meaning or intent of the Solicitation Documents to Contracting Officer in writing through the Bonfire portal. Contact information and submittal procedures for such questions are as follows: A. Questions must be submitted seven calendar days before the bid opening date. Inquiries received after this time frame may not receive a response