Renovation of a military facility in Lihue, Hawaii. Completed plans call for the renovation of a military facility.

Amendment 0001 The purpose of this amendment is as follows: 1. Provide Responses to questions received. 2. Provide a revised Statement of Work. 3. Extend the deadline for Quotes to July 9, 2026, 1:00 PM Hawaii time. 1. QUESTION AND RESPONSE The following questions and or clarifications requests were received from interested parties. All questions and clarifications have been consolidated. Questions are denoted by "Q" and the response is denoted by "R." Q1: There are one or two contradictions in the documents regarding the door specifications. Can you please clarify whether the door should be aluminum or stainless steel Is this an insulated door o In Section 6.1 (Products), the specification states that the door material must be "Aluminum in accordance with ASTM B-209" with an aluminum curtain and bottom bar. However, a few lines down in the same section, it states "Door shall have a galvanized finish". o Why it conflicts: Galvanization is a zinc-coating process applied strictly to steel to prevent rusting. Aluminum does not get galvanized; instead, it is typically left mill-finished, anodized, or powder-coated (which is also mentioned for the endlocks and hood). o Additionally, the specifications call for a 1/2 HP motor but later mention that the drive sprocket must match "5 HP torque requirements." Replacement of a rollup door at the Data Collection Office Lihue, including providing all labor, equipment, and materials necessary to remove and install the door in accordance with the Statement of Work. The work includes furnishing a non-insulated door system with a 1/2 HP motor and components meeting manufacturer specifications, as clarified in the revised Statement of Work. The contractor shall ensure compliance with all applicable requirements, provide country of manufacture verification under Buy American provisions, and complete the project within 180 days from the date of award. Monthly invoicing will be required, and site inspection is recommended to assess existing conditions affecting performance. Place of Performance is Data Collection Office Lihue 3260 Kailani St. Lihue Hawaii 96766. Questions should be received no later than1 PM HT (Hawaii Time) on 7/02/2026.