Renovation of a transportation facility in New Rochelle, New York. Completed plans call for the renovation of a 150-square-foot, one-story above grade transportation facility.

The City of New Rochelle is soliciting bids from qualified contractors for the following scope of work at the New Rochelle Train Station, located at 24 Station Plaza North, New Rochelle, New York. The project consists of refitting and whiteboxing an existing commercial space of approximately 150 square feet situated on the exterior ground level of the station Question Deadline 07/14/2026 at 10:00 AM ET No verbal interpretation of the meaning of the plans, specifications, or other contract documents will be made to any bidder. Every request for interpretation must be made in writing, addressed to aross@newrochelleny.gov and received at least five (5) business days prior to the date fixed for the opening of bids. ANSWERS POSTED BY: JULY 17, 2026 at 4:00PM 2.1 Door Replacement Remove and properly dispose of the existing entrance door. Furnish and install a new, updated , approved code-compliant entrance door intended to match the existing door's general size, style, location, and use. New door shall be installed in the same opening unless otherwise directed by the City. Door shall be configured to provide proper operation, accessibility, and safe egress in accordance with all applicable building, fire, accessibility, and egress requirements. Door shall open in the code-required direction of travel and shall not reduce the required clear opening width or obstruct the path of egress. Work shall include all required frame adjustments, hardware, hinges, lockset, closer, threshold, weatherstripping, sealing, finishing, and any other components necessary for a complete, secure, code-compliant, and properly functioning installation. Door and frame shall be commercial-grade, exterior-rated , aluminum storefront style or approved comparable, with tempered/safety glazing as required by code and compatible with existing opening conditions. Door hardware shall be commercial-grade and exterior-rated , including ADA-compliant pull/push hardware or lever hardware, hinges, closer, lockset/cylinder, threshold, sweep/weatherstripping, and related components. Hardware shall be ANSI/BHMA Grade 1 or Grade 2, or approved comparable, and shall not be residential grade. Final door, frame, glazing, and hardware selections shall be submitted to the City for review and approval prior to ordering or installation. 2.2 Wall and Ceiling Treatments 2.2.1 Remove existing wallpaper, loose paint, and any related wall/ceiling surface materials necessary to prepare the space for new finishes. 2.2.2 Remove existing recessed and surface-mounted ceiling lighting. 2.2.3 Patch and plaster walls and ceiling as needed using industry-standard materials and techniques. 2.2.4 Sand, prepare, and prime wall and ceiling surfaces prior to painting. Furnish and apply paint to walls and ceiling. Walls shall be painted Dune White, matte finish, or approved comparable. Furnish and apply paint to trims and moldings. Trims and moldings shall be painted Dune White, satin finish, or approved comparable. Protect adjacent surfaces, fixtures, and finishes during preparation and painting work, including use of drop cloths, masking, and other standard protective measures. Properly dispose of all debris and materials generated from wall and ceiling preparation work. 2.3 Lighting 2.3.1 Furnish and install eight (8) new 4" recessed LED ceiling lights or approved comparable. 2.3.2 Lighting installation shall include all labor, materials, connections, adjustments, and related components necessary for a complete and properly functioning installation. Furnish and install a code-compliant, LED-compatible dimmer switch controlling the new recessed ceiling lighting, including any required plates, wiring, connections, and related components for a complete and properly functioning installation. Contractor shall verify the existing electrical circuits serving the space prior to performing lighting work and shall connect the new lighting fixtures and dimmer switch to the existing electrical infrastructure as required for a complete, properly functioning, code-compliant installation. No electrical service upgrade, panel upgrade, or broader building electrical modification is included in this scope. Any unforeseen electrical deficiency that prevents a code-compliant lighting installation shall be brought to the City's attention in writing before any additional corrective work is performed. All electrical work shall be performed by a properly licensed electrician and in accordance with applicable code requirements. 2.4 Flooring 2.4.1 2.4.2 2.4.3 2.4.4 2.4.5 2.4.6 Prepare existing subflooring to receive new floor covering. Furnish and install Seafoam Mist Matte Penny Porcelain Mosaic, SKU: 101070605, or approved comparable, at the rear working area. Furnish and install Serene Ivory Tumbled Limestone Tile, SKU: 101305902, or approved comparable, at the front customer area. Flooring shall be installed in accordance with the provided marked-up floor plans. At the interface between the two tile fields, no transition strip or saddle is required. Contractor shall install both tile fields flush and level with a clean, straight, consistent grout joint at the interface, unless field conditions require otherwise and are approved by the City in writing. Contractor shall use standard grout suitable for the specified tile materials and intended use of the space. Grout color shall be selected or approved by the City prior to installation. 2.4.7 Setting materials , grout, sealers, and installation methods shall comply with tile manufacturer requirements, including any required sealing or protection for natural stone tile. 2.4.8 Furnish and install baseboard moulding as part of the flooring work. 2.4.9 Baseboard moulding shall be properly finished and coordinated with the wall and trim finishes.