BLOCK PAGE!!!

Get Full Details

Privately Funded

Bidding Soon

Documents Available

Publicly Funded

Addenda Available

Post-Bid

Saving Project...

Published September 10, 2026 at 8:00 PM

Updated September 12, 2026

Site work and new construction of a playground / park / athletic field in Garden City, Kansas. Completed plans call for the construction of a playground / park / athletic field; and for site work for a playground / park / athletic field.

Clint Lightner Field Concession, Restrooms, and Ticket Booth i. The work involves the design, fabrication, delivery, and turnkey construction of a 27'0" x 32'0" x 10'8" metal building with a concrete pad foundation. The structure must accommodate an adequate concession space with storage, a ticket booth, and two restrooms, one men's and one women's. Fansler and Cleaver Fields Concession and Restrooms i. The work involves design, fabrication, delivery, and turnkey construction of two 24'0" x 24'0" x 9'8" metal buildings with concrete pad foundations. The structure must accommodate an adequate concession space with storage and two restrooms, one men's and one women's. These buildings can be the same design. RFP questions should be emailed to Ticia Herd no later than August 21, 2026. Ticia Herd will provide a written response to all contractors who have indicated interest in submitting a proposal and provided an email address by August 28, 2026. Ticia Herd, Parks and Recreation Director Email: ticia.herd@gardencityks.us The City requires the Vendor to consider the aforementioned objectives and the following amenities in their design . The design will meet, at a minimum, all applicable codes and regulations and will be as least disruptive to the sites as possible. A. Clint Lightner Concession, Restrooms, and Ticket Booth Details a . Commercial metal building 27'0" x 32'0" x 10'8" with 9'4" b. Truss (standard lower chord ) with 4/12 roof pitch C. Default ceiling design : designed to support a liner steel panel ceiling d. Purlin blocking: both end walls are purlin blocked e. In-ground foundation f. Concrete floor g. 20 PSF ground snow load with 2" x 4" standard 2'0" inch on center purlins Exterior Finishes a. Roof/Siding: premium steel panel III. Accessories i . Premium steel panel with lifetime film integrity warranty, 35-year fade and chalk warranty, and G-90 galvanizing up to 1.0 ounce of Zinc protection a. 32'0" of standard ridge cap. Weather-tite ridge vent "low profile" b. Eave ventilation C. Steel exterior doors d. (2) Large slider window for the concession area to accommodate orders from customers, *double pane, insulated e. (1) Slider window for the ticket booth to accommodate sales, *double pane, insulated, locks Awning centered over the ticket booth window Porch - over the concession area window and east side i. Vented porch cover ii. Cedar column wrap columns Interior Finish/Insulation a. Wall and ceiling insulation with vapor barrier - R-factor suitable for our climate and energy efficiency b. Interior nailers: 2"x 4" nailers 36" oc Interior liner: liner steel panel i. Ceiling type: liner steel panel ii. Ceiling nailers: 4'0" oc spacing iii . Ceiling perimeter nailer iv. Ceiling hatch: 2'x3' AJ attic access door Exterior Finishes a. Roof/Siding: premium steel panel i. Premium steel panel with lifetime film integrity warranty, 35-year fade and chalk warranty, and G- 90 galvanizing up to 1.0 ounce of Zinc protection Accessories a. 24'0" of standard ridge cap. Weather-tite ridge vent "low profile" b. Eave overhang on (2) sides with ventilation C. Exterior steel doors d. (2) Large slider windows for the concession area to accommodate orders from customers, *double pane, insulated, locks Additional Building Components a. Electricity i. Full electric, includes interior and exterior lights, interior and exterior outlets, and 100-amp service b. Plumbing C. i. Includes (3) floor-mounted stools, (2) wall-mounted sinks, ( 1) urinal, (1) integrated utility sink, and ( 1) designated handwashing sink for the concession area, hot water heater, and all plumbing components necessary to hook up to City sewer and water. ii . All accessories ADA compliant Concrete Floor d . HVAC i. Interior concrete and 6' sidewalks on north, south, east, and west sides. All concrete will be 4" thick using wire mesh for reinforcement and 4000 PSI concrete mix i. HVAC system properly sized for the building e. Interior Trim i . Bathrooms - stall sides and fronts supplied and installed for both bathrooms. ii . Concessions - furnish and install 12 linear ft of base cabinets and Formica countertops, and 12 linear ft of wall cabinets f. Site Excavating/Site Prep i. Current building demolition and dispose of building on site

Post-Bid

$3,000,000.00

Public - City

Documents for this project are exclusively Specifications. If Plans become available, we will add them here.

Subscribe For Documents

No Data

Subscribe for All Details

Trades Specified

Division 00 - Lorem Ipsum

Division 00 - Lorem Ipsum

Lorem, Ipsum, Dolor, Sit amet

Find More Local Projects

Within 75 Miles of This Project
16
Active Projects
13
Bidding Soon
77
All Active Projects
0
Updated Recently

You’ve Reached the Free View Limit

Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.

Come back in [[refresh_days]] to get [[project_count]] more free projects.

September 10, 2026

October 7, 2026

Project location map

301 S 4th St, Garden City, KS

Related To This Project


Recently Viewed

Fuel growth with access to the bidding project info your business needs.

Full details, including key contact information, important dates, plans and specifications, on over 500,000 Projects including 5000 updated daily available to subscribers.