Asbestos abatement and renovation of a municipal facility in Elkhorn, Wisconsin. Completed plans call for the renovation of a 6,000-square-foot municipal facility; and for asbestos abatement for a municipal facility.

In general, the work consists of: Approximately 6,000 SF Roof Replacement Remove and dispose of existing ballast (or arrange in wind rows for reuse if suitable) , EPDM membrane, wet insulation, coping, deteriorated nailers, and all flashings . Temporarily displace and reset rooftop equipment as needed . Selective substrate prep: remove wet insulation ( presume 10% for base bid;3B provide unit cost for additional removal/replacement) . Inspect and repair/replace metal deck at wet areas as required . Install polyiso insulation over existing layers to achieve average R-30: Provide saddles/crickets to direct drainage to through -wall scuppers . Install loose- laid 60-mil non -reinforced black EPDM membrane with slip sheet ( if required) and ballast, secured per manufacturer, code/industry standards. Provide minimum 8" flashing height at all vertical surfaces . Manufacturer's 20-year NDL / 72 mph warranty and 5-year contractor warranty from completion . Install new wood nailers at edges and curbs as required. Provide new ANSI/SPRI ES- 1 and RP-4 compliant perimeter metal edge and coping . Install new through-wall scuppers and downspouts using existing discharge configuration . Remove abandoned rooftop components. Extend curbs, pipes, vents, and equipment as required. In Roof Area A , demo existing fixed wall ladder and install new code/OSHAcompliant ladder with platform, fall arrest, and lockable gate . Follow owner's requirements for any lead/asbestos abatement . Field- verify all dimensions , slopes , R -values , and flashing heights . Provide unit prices per bid form. All bids received from contractors who are not certified will be rejected. Sealed bids will be received as follows , before the time indicated : PDF scanned file of all required bid documents , including bid and bid bond forms with original wet signatures or properly transmitted electronic signatures (only PDF files will be accepted) submitted via the eBuilder Bidding Portal ( this is the preferred method ) Bid Portal before the time specified for the bid submission . Third party delivery is entirely at the bidder's risk. No deposit is required to obtain documents for bidding purposes .