Renovation of an educational facility in Conway, South Carolina. Completed plans call for the renovation of a educational facility.

Purchase and installation of a custom locker system for the University Soccer complex. Question Submission Close Date 7/13/2026, 4:00 PM EDT Coastal Carolina University seeks a source to purchase and install a custom locker system for the University Soccer complex per the specifications below. Locker System Design Design and fabricate a custom locker system consisting of two locker rooms with twenty-eight (28) individual player lockers. Provide design layout of the lockers in per the attached blueprints Measurements and new design layout approval after award and prior to purchase of lockers. Lockers shall be constructed using solid surface or comparable high-durability materials appropriate for athletic facilities. " " Constructed of solid surface material that is resistant to: n Moisture and humidity Impact and wear Locker units approximate dimensions n n Overall height: ~7'-0" to 7'-2 1/8" Locker width: 1'-0" to 3'-0" per section Internal compartment heights: ~3'-10" Depth/structural components: 4" to 2 1/8" Lockers shall be white " Each locker unit shall include: n " _ n Individual locker compartments with doors Upper storage cubbies Hanging space with garment rod Integrated seating with fixed seat cushion n Seat cushion color are black " Coastal Carolina logo applied to the lockers- design supplied after award Name plates need to be removable and changed Provide design and type of material for the Nameplates Each locker shall include the following functional components, or approved equivalents: n " n Non-illuminated clear nameplate area suitable for vinyl graphics (graphics provided by others) Hinged locker doors with integrated locking hardware Digital or electronic locking mechanism with aluminum or similar finish n Single hooks and hanging rod for apparel storage n " n Drawer hardware with durable finish Finished locker backs, shelves, doors, and structural subcomponents in coordinated colors Provide information on the color and material for the inside of the lockers and doors. Toe kick and substructure suitable for final finish by others, if applicable Fillers, Trim, and Finished Ends n Provide all required project fillers, trim pieces, and finished end panels necessary for complete and professional installation. Fillers and finished ends shall integrate seamlessly with the locker system and surrounding architectural conditions. Delivery and Installation _ _ Deliver all locker components to the project site. Provide installation plan that includes Perform full installation of the locker system, including: " Onsite assembly " Anchoring and leveling " Final fit and alignment Installation shall be completed in one mobilization Warranty: Provide a one (1) year warranty on workmanship and installation _ _ Provide documentation on hardware components warranty Approval will be required prior to fabrication: Shop drawings: " Layout and dimensions Mounting and anchoring details Product data sheets (materials, finished, and hardware)