New construction of an educational facility in Vincennes, Indiana. Completed plans call for the construction of a educational facility.

Fabrication and installation of a metal branding sculpture including design, structural framing, welding, finishing, and site installation. Scope of Work The awarded Sculpture Contractor will provide all design , labor, tools, equipment, and materials necessary to fabricate and install the New V.U. Branding Sculpture. General Requirements: 1. The New Sculpture internal structural framing shown on the attached drawings are for conceptual purposes only. The sculpture contractor/fabricator shall provide adequate structural armatures to withstand all applicable wind, seismic, and dead loads per Indiana Building Code. 2. All exposed welded joints shall be fully welded. All exposed welds shall meet NOMMA Type/Finish 1. Welds shall be finished to a seamless, polished appearance, with no visible evidence of a welded joint. 3. All exposed metal surfaces shall have a smooth unblemished brushed or satin finish. Roughness average (Ra) of 0.5 0.1 4. The awarded Sculpture Contractor shall provide product data, material samples, and shop drawings for the new sculpture. Shop drawings shall detail how the sculpture will be constructed and installed. 5. The awarded Sculpture Contractor shall field verify all conditions prior to fabricating, delivering, and installing the New Sculpture. 6. The final sculpture shall be installed level and plumb. 7. See the attached Drawings for additional project specific information. Question Deadline 07/31/2026 Every request for such interpretation should be in writing addressed to Project Architect and to be given consideration must be received at least five days prior to the date fixed for the opening of bids