This is a service / maintenance or supply contract in Carbondale, Illinois. Contact the soliciting agency for additional information.

The Complexity Factor for this project is 0 The Consultant who is selected for this project and all Subconsultants the Prime Consultant will be using are scheduled to attend an initial meeting on October 28, 2026, at 10:00 AM at the Region Five/District Nine Office in Carbondale. Phase III engineering services are required to provide construction supervision, inspection, engineering layout, and record maintenance for various projects in District Nine. Quality Assurance (QA) testing for hot mix asphalt (HMA), Portland cement concrete (PCC, soils, and aggregate. The Consultant may be required to furnish a Liaison Resident Engineer complete with staff capable of running individual projects and work directly with the department's Resident Engineers and Technicians to ensure adequate engineering services required for these projects are in place. The Consultant’s workforce shall be adequate to allow completion of these projects in a timely manner and in accordance with the department's Standard Specifications for Road and Bridge Construction. The Consultant must complete and submit final measurements, calculations, and contract record documentation to the department no later than six (6) weeks after completion of each project as required. Consultant staff should expect night work on some projects. Staffing levels could range from six (6) to eight (8) inspectors during peak construction season. Questions concerning this Bulletin should be directed to: E-mail: DOT.ConsultantServices@illinois.gov Or mailing address: Bureau of Design and Environment 2300 South Dirksen Parkway Attn: Consultant Unit Room 330 Springfield, IL 62764 The Prime firm must be prequalified in the Special Services (Surveying) category to be considered for this project. Statements of Interest, including resumes of only the key people noted above, must be submitted electronically to the Central Bureau of Design and Environment through the Engineering Prequalification and Agreement System (EPAS). The method of contractor selection has not been determined at this time. ILDOT - 043 - RFQ - Various Phase III Projects, Various Routes