Site work, paving, environmental remediation, outdoor lighting and renovation of a mixed-use development in American Fork, Utah. Completed plans call for the renovation of a road / highway.

Replace existing cast iron and galvanized waterlines, service laterals, isolation valves, and fire hydrants. Includes repair of existing drainage, roadway, streetlight improvements, and sidewalk/ADA deficiencies along the corridor. Question Deadline 08/20/2026 at 12:00 PM MT Questions may be submitted through online City anticipates that the professional services provided by the firm selected for this project shall consist of, but not necessarily be limited to, those outlined below: Complete engineering design, preparation of construction documents, provide bidding assistance, and provide construction management (including all meeting documents) for the King Street Water Line and Infrastructure Improvement Project/CDBG 11 to include the following: 1) Geotechnical, survey and other site investigations to facilitate the design. 2) Design water main, lateral , valves, line stops, and fire hydrants replacement on King street from 100 N to 500 E. 3) Assess pavement and subgrade health and produce pavement rehabilitation design. 4) Assess ADA ramp, sidewalk, curb and gutter, streetlight, underground utility conduit and drainage deficiencies and provide design for replacement as needed. Include tree removal where needed. The project is currently in the design phase, and a final engineer's estimate is not yet available. Based on current information, the preliminary construction budget is estimated to be between $700,000 and $950,000. This range is subject to change as the project design progresses and additional details are finalized. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.