Demolition, site work and paving for a medical facility in Fall River, Massachusetts. Completed plans call for the demolition of a medical facility; for site work for a medical facility; and for paving for a medical facility.

Removal of existing loading dock and installation of new asphalt driveway. TRD02 Category 1 : Asphalt Paving Services Project Description The Contractor shall furnish all labor, materials, equipment, supervision, transportation, permits (if required), and incidentals necessary to remove and replace the existing asphalt driveway in its entirety. All work shall be completed in accordance with applicable federal , state, and local regulations, industry standards, and manufacturer recommendations. Scope of Work The Contractor shall perform the following work: 1 . Demolition and Removal Saw cut pavement where required to provide clean transitions. Remove the existing asphalt pavement. O Load, haul, and legally dispose of all removed asphalt and associated debris at an approved disposal facility. Protect adjacent pavement, curbing, utilities, landscaping, and structures from damage during demolition. Subbase PreparationScarify the existing gravel subbase to the depth necessary to achieve the required finished grades Furnish and install additional processed gravel as needed to correct deficiencies and establish proper drainage and pavement elevations. Fine grade the processed gravel subbase to the required lines and grades. Compact the subbase using appropriate compaction equipment to achieve a stable, uniform surface suitable for paving. Hot Mix Asphalt Installation Install a Hot Mix Asphalt (HMA) 3/4-inch Binder Course at the specified compacted thickness. Install a Hot Mix Asphalt (HMA) 3/8-inch Top Course over the binder course at the specified compacted thickness. O Place and compact all asphalt in accordance with Massachusetts Department of Transportation (MassDOT) specifications an