Site work and renovation of a transportation facility in Baltimore, Maryland. Completed plans call for the renovation of a transportation facility.

Construction of electrical and mechanical improvements for the Riverside Rail Yard. DESCRIPTION OF WORK This Contract is for the construction of electrical and mechanical improvements for the Riverside Rail Yard located at 1600 Ludlow St., Baltimore City, Maryland 21230. The Riverside Rail Yard is located in a portion of Ward 24 Section 06, Block 2059 Lot 001 and Block 1947 Lot 001 and all of Ward 24 Section 08, Block 1946 Lot 019 and Block 1945 Lot 071B.. The work also involves the following: 1. Furnish and install wayside power stations near Buildings 2 and 12. 2. Furnish medium voltage feeder from existing switchboard to new transformer at Building 2 and new transformer at Building 12.Route new medium voltage feeder through Buildings 3 and 2. Route new medium voltage feeder from Building 2 to Building 12 by cut and cover trench through existing access road. Provide required hand holes, manholes, etc. 3. Provide new transformer and switchboard at Buildings 2 and 12. 4. Provide new compressed air piping from general location of the sanding equipment and extend to new compressed air receiver at Building 12 and extend to new compressed air outlets next to tracks. 5. Provide new compressed air piping from overhead compressed airtracks 6. Provide new compressed air receiver next to Building 3. 7. Provide structural platform at Building 12 to set new transformer and switchboard on. 8. Furnish and install a wayside power monitoring system. 9. Furnish and install conduit and OM3, single-mode fiber optic cable from power monitoring gateways to existing network cabinets in Bld- 1 and Bld-12. 10. Furnish new controllers on two existing 75 HP Kaiser air compressors. Questions Deadline 14 july 2026 04:00 PM EDT estions regarding the Contract should be submitted as outlined in the KISS. B. Questions must be received no later than the due date and time specified in the KISS.