Demolition, site work and new construction of a transportation facility in Winter Haven, Florida. Completed plans call for the demolition of a transportation facility; and for the construction of a transportation facility.

Removal of existing gate operators and gates; furnishing and installing a new high-security cantilever slide gate system at the Airport. The Contractor shall provide all labor, materials, equipment, permits, supervision, transportation, disposal, and incidentals necessary to remove the existing gate system and furnish/install a complete new high-security automated slide gate system. Removal and lawful disposal of two (2) existing gate operators and existing gates. Furnish and install one ( 1) 24 -foot aluminum cantilever slide gate Furnish and install welded gate frame with internal roller assembly. Furnish and install two (2) 4-inch O.D. mounting posts set in concrete footings. Furnish and install thirty-five (35) linear feet of 6-foot-high chain link fencing at back track area of slide gate Furnish and install one ( 1 ) high -security hydraulic slide gate operator equivalent or better to HySecurity SlideDriver II SD15 with aluminum drive rail. Furnish and install surge suppressor with ground rod assembly. Furnish and install photo eye safety sensor at gate opening. Furnish and install safety edge at rear of gate frame. Furnish and install in -ground detection loop sensor with reversing function. Furnish and install in -ground detection loop sensor with free-exit/reversing function. Furnish and install Knox Switch for emergency vehicle access. Complete all programming, testing, calibration, and commissioning of the gate system. Question Deadline 09/15/2026 at 2:00 PM ET Question submitted to online.