Site work and renovation of a multi-residential development in Middletown, New York. Completed plans call for the renovation of a multi-residential development.

Roof replacement including plywood sheathing replacement, fascia board and wrap installation, and vinyl soffit installation. This is an RFQ (request for quotes). This is not an IFB (bid). The Hudson Valley DDSO intends to award the contract to the most responsible and responsive vendor that provides the lowest the lowest combined price for the roof replacement, as per the scope of work plus the additional requested pricing of A or B or C + D + E + F (see below) for the total project price: A - Provide and install 4' x 8' x 1/2 " CDX Plywood (1) B - Provide and install 4' x 8' x 5/8" CDX Plywood ( 1) C- Provide and Install 4' x 8' x 3/4 " CDX Plywood (1) The vendor shall provide all labor and materials necessary to complete the work in a professional manner according to scope of work and architectural drawings if supplied. Work is to be completed within 30 days of award. This is a NYS Public Works project and prevailing wages are to be paid. Refer to attached specification for the following scope of work. Site must be cleaned and all materials secured at the end of each work day. Absolutely no scraps, especially fasteners, are to be left unsecured. Upon completion, before removal of equipment and scaffolding, contractor is to schedule a quality control and quality assurance inspection with Plant Superintendent. SCOPE OF WORK includes, but is not necessarily limited to the following: Remove existing shingles down to original decking Replace decking and fascia (aluminum wrapped) where necessary with appropriate size and grade Install 6' of ice and water shield on eaves and 3' on rakes and valleys Install new drip edge, flashing, counterflashing, pipe boots, synthetic underlayment, starter shingles, and 30 year architectural shingles and ridge cap All shingles to be installed with high wind nailing pattern Install new .032 gauge seamless commercial white 5" gutters with reverse curve gutter guards, with .019 gauge 3"x4" leaders Gutter hangars to be installed at 16" increments Please review the frequently asked questions on the NYSDOL website that have been created to provide additional support: Frequently Asked Questions for NYSDOL Contractor Registry | Department of Labor. For any additional questions regarding the Contractor Registry process, please reach out to the Bureau of Public Work and Prevailing Wage at 518-457-5589 or send an email to: labor.sm.pwask@labor.ny.gov.