Site work and paving for a sidewalk / parking lot in Louisville, Colorado. Completed plans call for site work for a sidewalk / parking lot; and for paving for a sidewalk / parking lot.

Reference Number 0000436564 For work at Aquarius Open Space Parking Lot including: the resurfacing of the parking lot; replacement of wheel stops; and installation of a bollard and barrier gate. The Aquarius Open Space parking lot is located on the north side of Highway 42, located directly west of the Coal Creek Cemetery; Questions regarding the proposal can be directed to: Nick Potopchuk City of Louisville 739 S 104th Street Louisville CO 80027 303.335.4728 npotopchuk@LouisvilleCO.gov SCOPE OF WORK Parking Lot Resurfacing Responsibilities: 1. Contractor is to follow design/drawing specifications for grading value, drainage, slope/cross slope for Aquarius parking lot resurfacing as found in "Exhibit D- Maps & Specifications." 2. Contractor is to scarify, regrade, and resurface approximately 18,000 square feet of the Aquarius parking lot, including fine grading and compacting the top 4 inches of existing Class 6 road base to achieve proper drainage, slope, and cross slope as specified in "Exhibit D - Maps & Specifications. " All quantities must be field verified by the contractor prior to project start with a City project representative. 3. Contractor is to provide a compaction standard of 95% (standard proctor). 4. Contractor will use biodegradable erosion control blanketing if necessary ( no plastics allowed). Wheel Stop Responsibilities: 5. Contractor is to remove, dispose, and replace 23 existing wheel stops. 6. Contractor will procure and furnish 23 new rubber wheel stops: 6' in length, with 1 to be blue in color to be installed at the ADA parking space, and the remaining 22 to be gray in color. The parking stops are to be "Premium Rubber Wheel Stops" and are to be sole sourced from Barco Products (Gray: SKU: 06FY1770-GY; Treetop SKU : 3YW3134-GY or Blue: SKU:06FY1770-BL; Treetop SKU:3YW3134-BL). 7. Contractor is to verify wheel stop locations, alignment, spacing, and setback distances with the project representative prior to installation. 8. Contractor is to install 23 new rubber wheel stops according to manufacturers' specifications. a. Remove debris, vegetation, and loose aggregate as necessary to provide a stable installation surface. b. Grade and compact aggregate material at each wheel stop location to create a level installation area. c. Provide all required galvanized or stainless-steel anchoring hardware suitable for aggregate surface installations. d. Drill pilot holes and install rebar, spike anchors, or other manufacturer-approved anchoring systems through the wheel stops into the compacted aggregate base. e. Secure wheel stops to prevent movement, displacement, or rotation under normal vehicle impacts. f. Adjust surrounding aggregate as necessary to ensure a flush and stable installation