Site work and paving for a road / highway in Cape Coral, Florida. Completed plans call civil work for a road / highway.

Roadway improvements to Caloosa Parkway. Question Deadline 09/30/2026 at 2:00 PM ET All questions must be submitted through OpenGov at online The Contractor is to furnish all labor, materials, equipment, and operations necessary to complete the following roadway improvements work on Caloosa Parkway (Attachment A. Standard Plans). In addition to other items, as outlined in the specifications and bid documents, the roadway improvement operations may include, but shall not necessarily be limited to all or part of the following: A. Maintenance of Traffic (MOT): Provide, install , and maintain all required traffic control devices and detours in accordance with FDOT standards and City-approved MOT plans. B. Public Notification: Notification to public safety departments and affected Citizens, up to including coordination with the City's Communications Department and door hangars, if necessary, of work within the right-of-way that would result in detours of emergency vehicles or interruptions of daily activities for residences and businesses. C. Erosion Control : Provide erosion control measures on the project to prevent pollution of water, detrimental effects to public or private property adjacent to the project right-of-way and damage to work on the project. D. Permits: Contractor shall obtain all required permits for the roadway improvements scope of work. E. Vegetation Control and Surface Preparation : Perform clipping, herbicide application, edge scraping, and surface cleaning to establish uniform pavement edges and proper drainage to adjacent swales. F. Milling Operations: Milling of the existing roadway surface. G. Leveling and grading: Perform grading and leveling of the existing surface to achieve uniform profile and cross slope prior to paving. H. Clearing and Grubbing: Cut, grub, remove and dispose of all trees, stumps, brush, shrubs, roots and any other objectionable material within the limits of the construction. I. Roadway Widening: Construct widening improvements on Caloosa Pkwy in accordance with the typical cross-section and plan set provided in the bid documents. J. Regular Excavation: Excavate material between the original ground line and the finished grading template of the roadway . Delivery of material to the job site (hauling). L. Application of prime and/or tack coat(s). M. Limerock Base : construct a base course on the prepared subgrade composed of limerock. N. Asphalt Testing: Submit in -place density tests to the city according to the tonnages outlined in the FDOT standards and specifications for road and bridge construction O. Superpave Type SP- 9.5 & 12.5 Asphalt Overlay. P. Bid Additional - Pavement Markings: Replace all striping, symbols, and RPMs in accordance with current MUTCD and FDOT standards; add new markings where directed . This shall include, as needed, any thermoplastic pavement markings, thermoplastic directional arrows, words, including "only", thermoplastic bike symbols with arrows, and striping. Q. Cleanup: Street sweeping, as necessary, & final clean-up of the job site and repair of any damage caused by contract activities. R. Sod Installation and Restoration : replace sod as directed by City staff along roadway edges disturbed by construction with like kind and quality to match existing conditions.