Privately Funded
Bidding Soon
Documents Available
Publicly Funded
Addenda Available
Post-Bid
Saving Project...
Published September 25, 2026 at 8:00 PM
Updated September 28, 2026
Renovation of a mixed-use development in Plainview, Texas. Completed plans call for the renovation of a educational facility.
Plainview Independent School District will receive sealed competitive proposals: Walk-in Cooler And Freezer Replacement-PHS Plainview High School, 1501 Quincy St., Plainview, TX 79072 Plainview Independent School District reserves the right to accept or reject any and all bids/proposals and to waive any irregularities, technicalities, or informalities in any bid/proposal or in the bid/proposal process. Question Deadline 10/06/2026 All questions must be submitted in writing and will be responded to in writing and then sent to all potential vendors with the District answers, so therefore all questions must be addressed to Becca Dunlap, becca.dunlap@plainviewisd.org, Purchasing Manager. Any proposals declared by the District to be "Late" will be deemed a No Response and will not be considered. These proposals will be returned unopened. Labor and material to remove existing cooler and freezer Labor and material to install American Panel Corp (or equal) walk-in cooler and freezer. Freezer internal dimensions 8"-10"x11 '-0.5"x7'- 10.25" high -10 degrees F; Cooler internal dimensions 8'- 10"x11 '-0.5"x7" - 10.25" high 35 degrees cooler. Dealer is responsible for verifying all quantities, measurements, direction, hinging, voltages, and utility specifications based on existing utilities, specifications, and drawings. By submitting a bid, the Dealer affirms that they have carefully examined all the relevant materials to include but are not limited to specifications, bidding requirements, site conditions, drawings and are fully accountable of the requirements for carrying out the work to include reasonably inferred items or work. Awarded Dealer to correspond with district on lead times, coordinate removal of existing equipment, installation dates, and completion of project. Dealer to correspond with district on lead times, coordinate removal and disposal of existing equipment, installation dates, and completion of project. - If any utility upgrades are necessary, please call out in price. Bidding dealers are to include the costs for the requirements below within their proposal Preferred equipment installation date: December 21 , 2026-January 1 , 2027. American Panel Two Compartment Walk-In model #218792 (or equal). Actual Exterior Dimensions: To be verified during walkthrough to ensure correct measurements Floor Configuration: To be verified during walkthrough to ensure correct configuration Interior floor finish to be 1/8" Diamond Aluminum Treadplate (Intg.). Cooler interior dimensions to be verified during walkthrough to ensure correct measurements 4" Insulated Floor Interior - floor finish to be 1/8" Diamond Aluminum Treadplate Interior wall finishes to be .040 stucco aluminum interior ceiling to be .040 stucco aluminum exposed exterior to be 20 ga. stainless steel, 3 finish unexposed exterior to be 26 ga. stucco acrylume (2) flush mount magnetic infitting door with cam-rise hinges padlockable deadbolt handle brushed hardware fully programmable Intelligent Controller (IC) featuring audio/visual temperature alarm with digital thermometer, high & low set points, energy saving door frame heater wire, vapor proof light & switch with pilot light. Accessories to include: (2) Intelligent Controller Plus (IC+) w/ APCChillCloud LC Package (Wi-Fi, Dry Contacts, USB, Batt., 25' Probe, Panic Alarm) (2) Extra LED Light Fixture, Vapor Proof with globe & 8.5W LED bulb (2) Floor Ramp, Interior (24" deep) for up to 42" door (1) 3/4" Plywood Underlayment in Floor Panel (not available with 2" floors) (2) Dial Thermometer, 2.0" flush mount with 6" sensor (2) Vision Window, 14" x 14 " heated (4) Door Kickplate, 20 ga. S/S, 36" High, <37" Door (2) Trim Strips, 3 " x 3 ", 20 ga. Stainless Steel (2) LED Light Fixture, Cooler & Freezer, 48" 2-lamp (-40F or higher operating temp.) (2) Door frame electrical conduit stubbed out roof panel (2) Foot Treadle (Dent D-82) (24) Bumper Rail, 4" x 22 ga. S/S with wood insert & Hidden Top Mounting (2) CCI Clear Vu 2-pc Swing Door Curtain, 34" (or 36") x 80" opening (2) CAL-OSHA 3 -Way Momentary Back-to-Back Press Switch
Sub-Bidding
$100,000.00
Public - City
Trades Specified
Division 00 - Lorem Ipsum
Always Free
- Use filters and keyword searches to find valuable projects
- Get promoted to General Contractors and receive ITBs
- Access limited project details, bid dates, and locations
One Low Price
- One license and one market
- Details and key contacts on all bidding projects
- Organize your pipeline with a digital bid board
- Automatically match opportunities to your profile
- Saved searches deliver daily project leads to your email inbox
Market Pricing Around
- All Starter Product functionality
- Access to all documents (plans, specifications, and addenda)
- Access to planning projects
- Access to contact information
- Ability to Export
Find More Local Projects
Within 75 Miles of This Project
You’ve Reached the Free View Limit
Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.
Come back in [[refresh_days]] to get [[project_count]] more free projects.
October 13, 2026
December 21, 2026
1501 Quincy, Plainview, TX
Related To This Project
Plainview, TX
--
Plainview, TX
--
Plainview, TX
--
Plainview, TX
--
Plainview, TX
--
Plainview, TX
--
Plainview, TX
Bid Date: Sep 08 2026
Plainview, TX
--
Plainview, TX
Bid Date: Aug 19 2026
Plainview, TX
Bid Date: Sep 24 2026
Plainview, TX
Bid Date: Aug 21 2026
Plainview, TX
Bid Date: Aug 11 2026
Plainview, TX
--
Plainview, TX
Bid Date: Aug 05 2026
Preview Active Commercial Construction Projects Like This One
Get preview access now—no credit card required.
