Renovation of a mixed-use development in Abiquiu, New Mexico. Working plans call for the renovation of a power facility; and water / sewer project.

Los Alamos County is seeking a qualified Contractor to furnish and install two new overhead hoist cranes that sit on a stationary structure at the Abiquiu Hydroelectric Power Plant. The plant sits at the base of the Abiquiu Dam and utilizes the outlet works where water flows directly into the Rio Chama in Northern New Mexico. The existing cranes are rated approximately two tons each and are inadequate for the lifting requirements associated with operation of the PRV gates. Each crane provides lifting support for one of the two gates, which are not lifted simultaneously. The project will replace the existing cranes with two new cranes; each rated for five tons. Question Deadline 10/15/2026 at 2:00 PM MT Questions must be submitted through the County's Procurement Portal. The summary of work is as follows, but is not limited to the following: Los Alamos County is seeking a qualified Contractor to furnish and install two new overhead hoist cranes that sit on a stationary structure at the Abiquiu Hydroelectric Power Plant. The plant sits at the base of the Abiquiu Dam and utilizes the outlet works where water flows directly into the Rio Chama in Northern New Mexico. The existing cranes are rated approximately two tons each and are inadequate for the lifting requirements associated with operation of the PRV gates. Each crane provides lifting support for one of the two gates, which are not lifted simultaneously. The project will replace the existing cranes with two new cranes, each rated for five tons. The Contractor shall furnish two new five-ton cranes from a qualified manufacturer selected by the Contractor, subject to Owner approval. The work shall include removal of the existing cranes, delivery and installation of the new cranes, and all associated equipment, controls, and accessories required for a complete and operational system. The existing crane railway beam is not adequate for the future loading of the new five-ton cranes. The Contractor shall remove and replace the existing beam as required and provide all structural steel, connections, and installation necessary to support the new cranes. All structural welding shall be performed by a qualified/certified welder in accordance with the project plans, specifications, and applicable codes and standards. Bid date is cancelled as per WS.