Demolition, site work, renovation and addition to an educational facility in Midland, Texas. Completed plans call for the addition of a 960-square-foot, one-story above grade educational facility; for the demolition of a educational facility; for the renovation of a educational facility; and for site work for a educational facility.

40' x 24' x 12' Turnkey Metal -Building Addition The successful contractor shall provide a complete, turnkey gymnasium addition measuring approximately 40 feet long x 24 feet wide x 12 feet high. Contractor shall field-verify dimensions and existing conditions before submitting a bid and before beginning work. Demolition and Concrete Remove and legally dispose of the existing concrete pad within the project area. Prepare subgrade and site for the new construction. Provide a new concrete slab/foundation suitable for the metal-building addition. Provide reinforcing steel, anchors, footings/grade beams, vapor barrier, base material, finishing, testing and other components required by the final engineered design. Coordinate concrete/foundation work with the metal-building manufacturer's structural requirements. Metal Building and Existing-Gym Tie-In Furnish and erect a complete 40' x 24' x 12' metal-building addition. Structurally connect the addition to the existing gym as required by the final engineered design. Provide all roof and wall transitions, flashing, trim, sealants and weatherproofing necessary for a watertight connection. Make required modifications to the existing gym necessary to complete the connection. Match or coordinate exterior materials and finishes with the existing gym where practical. Insulation o Provide insulation for the roof and exterior walls of the addition. Insulation system shall comply with applicable energy/code requirements and be suitable for gymnasium use. Bidder shall identify the insulation type and R-value proposed with the bid. Electrical Provide complete electrical work for a fully functional addition. Include wiring, conduit, LED lighting, switches, receptacles, required circuits, disconnects and controls. Connect to the existing electrical system where feasible and provide required panel/service modifications necessary for the addition. Include electrical work required for HVAC equipment. All electrical work shall comply with applicable codes and inspection requirements. HVAC Provide a complete HVAC system properly sized for the 40' x 24' x 12' addition. Include equipment, ductwork/distribution, thermostat/controls, condensate, electrical connections, supports, penetrations and accessories. Coordinate or integrate with the existing gym system where appropriate. Bidder shall identify the proposed HVAC equipment/type and capacity with the bid. Permits, Safety and Closeout Provide required permits, inspections and contractor-required fees unless specifically listed as an exclusion. Comply with applicable building, structural , electrical , mechanical , fire/life-safety and accessibility requirements. o Maintain safe separation of construction activity from students and staff. Remove construction debris and leave the project ready for school use. Provide warranties, lien releases, closeout documents and applicable equipment manuals. Turnkey Requirement The lump-sum bid is intended to include ALL labor, materials, equipment, supervision, transportation, connections, accessories, permits, inspections, cleanup and incidentals reasonably necessary to deliver the completed gym addition ready for use by MACS, except for items expressly identified by the bidder in the Exclusions from Lump-Sum Bid section. Turnkey metal-building addition tied into an existing gymnasium. Scope includes removal of existing concrete pad, site preparation, foundation installation, building erection, insulation, structural and weather-proof tie-ins, electrical, HVAC, and related construction.