Renovation of a multi-residential development in Evart, Michigan. Completed plans call for the renovation of a multi-residential development.

An existing building is being renovated into residential units on the first and second floor. The west end of the first floor is to be white-boxed for future commercial tenants. The selected Contractor shall furnish all labor, materials, equipment, supervision, permits, and inspections required to complete the Second Floor rehabilitation in strict accordance with the permit drawings prepared by Driven Design Studio PLLC and GreenPath Design. Selective Demolition & Site Prep Complete removal of designated interior walls, drywall ceilings, floor finishes, doors, storefront assemblies, and legacy plumbing/electrical/HVAC fixtures within the Second Floor work footprint. Removal of exterior awning cladding and redundant framing down to sound substrate as shown in drawings. Structural shoring, floor patching, and subfloor leveling across transition boundaries. Residential Apartment Buildout (East Portion) Full turnkey interior construction of seven apartments. Interior Framing & Drywall : Type 1 , Type 2 , and sound-attenuated/fire-rated wall assemblies ( 1 -hour partitions where indicated). Finishes & Casework: Resilient LVT/plank flooring, tile in wet locations, solid-core doors, trim, painted drywall, and full kitchen/bathroom cabinetry. ADA Compliance: Does not apply to the upper level units. Historic Exterior Restoration & Masonry Work Brick Restoration: Cleaning of historical exterior brick using Prosoco Heavy Duty Restoration Cleaner (or approved equal). Tuckpointing: Repointing eroded mortar joints using a lime putty- based mortar with matching aggregate, adhering to National Park Service historic preservation standards. Exterior Openings & Canopy: Installation of new Quaker narrow-sightline aluminum replacement windows, steel lintels over openings, new wall-mounted exterior entrance canopy with integrated LED lighting and drainage, and paint removal/restoration along historical wall surfaces. Mechanical, Electrical, Plumbing & Fire Protection (MEP/FP) HVAC: High-efficiency gas furnaces, split-system AC condensing units, ERV systems, ductwork distribution, diffusers, and programmable thermostats. Plumbing: New domestic water distribution, sanitary waste/vent piping, gas piping, high-efficiency electric water heaters, backflow preventers, and all specified fixtures (ADA water closets, lavatories, showers, sinks). Electrical: New electrical panels, service entrance feeders, commercial MC cable/EMT raceways for commercial areas, Romex wiring inside residential units, LED lighting fixtures, exit/emergency egress lighting, fire alarm devices, and door access control rough-ins. Fire Protection: Complete wet pipe automatic fire sprinkler system coverage across the entire Second Floor area in compliance with NFPA 13. Deadline for Questions Friday, September 25th, 2026 at 6:00 PM EDT Email to Architect Contact: Cody Newman | Phone: (269) 753-8040 | Email : cody@drivendesignstudio.com