Demolition, site work and renovation of a military facility in Hampton, Virginia. Completed plans call for the demolition of a military facility; for the renovation of a military facility; military facility; and military facility.

FENCE AND GATE (CANTILEVER SLIDE GATE, POSTS, BARBED WIRE, DEMO AND HAUL) - Remove and dismantle existing steel cantilever slide gate (~36 ft x 7 ft) from tracking and posts - Furnish and install cantilever slide gate for 24 ft opening, 7 ft 9-ga 2-in galvanized fabric per RR-F-191-K, dual track, 45-degree outrigger - Galvanized barbed wire, 3 strands on gate outrigger - 45-degree outward extension arms, 3-strand, on gate frame - Replace gate support posts, 4-in OD Sch 40 galvanized, set in concrete - Haul demolished gate, operator and debris off base GATE OPERATOR / LOW-VOLTAGE ELECTRICAL (OPERATOR INSTALL, KEYPADS, PEDESTAL, CONDUIT, LOOPS, GROUNDING) - Disconnect, lock out/tag out and make safe power feed to existing slide gate operator; remove operator - Install HySecurity SlideSmart HD30 operator with UPS on existing pad (labor only; operator unit carried under supplier) - Install monitored photoelectric safety beam set across vehicle opening (UL 325) - Disconnect, test and re-integrate two existing Linear AK-11 keypads into new operator - Relocate existing gooseneck reader pedestal to driver-side approach: remove - Reinstall relocated gooseneck pedestal on new footing and terminate - 1-in Sch 40 PVC conduit, crossing plus risers - Control conductors for keypad and pedestal extension - Test existing in-ground loops; sawcut asphalt and install/extend inductive loop wire - Inductive loop wire extension - Copper-clad ground rod, 5/8 in x 8 ft - Bronze grounding clamps - Bare solid copper ground wire GATE OPERATOR UNIT (SUPPLIER) - HySecurity SlideSmart HD30 heavy-duty slide gate operator with integrated 24V DC UPS battery backup SITEWORK / ASPHALT / BOLLARDS - New footing for relocated gooseneck pedestal - Sawcut asphalt for road crossing to relocated pedestal - Trench for pedestal conduit road crossing, 24 in deep - Cold patch asphalt restoration over trench, 4-in depth - Remove existing bollards at current keypad location - New 6-in concrete-filled painted steel pipe bollards at relocated pedestal