Renovation of an educational facility in Boulder, Colorado. Completed plans call for the renovation of a educational facility.

Reference Number 0000439225 CU Boulder-UCB001153-ECOT-Window Replacement (2025-082M24)-Phase 1 The scope of services will be as required by the Contractor's Design/Bid/Build Agreement (Form SC-6.21 ) and the Construction Documents prepared by Martin/ Martin Inc. Abatement will be required. Contractor will carry this requirement. Curtain wall systems and punch windows are expected to be long lead items. Underground utility tunnels exist beneath portions of the site and have limited structural capacity. Contractor shall coordinate all staging, access routes, material storage, and equipment operations to avoid overloading tunnel structures. A 17,600 lb, 36'-reach telehandler was evaluated during the project mock-up and associated structural analysis indicated tunnel protection was required for travel over tunnel areas. The analysis required eight (8) 1-inch-thick steel plates beneath the telehandler to distribute loads during operations over the tunnels. contractor shall provide any necessary tunnel protection, subject to review by the owner. On-site project construction will begin May 2, 2027. Project completion is expected August 1 , 2027. This is a phased project, and Phase 1 will address the curtain walls and windows on the north side of the building. Abatement will be required; and the General Contractor must carry this responsibility. Question Acceptance Deadline 10/13/2026 04:00 PM EDT Questions are submitted online Yes