Renovation of an office development in Ottawa, Ontario. Completed plans call for the renovation of a four-story above grade office development.

Renovation of the roof at 5 different sections of an occupied 4-storey federal office building. Scope includes removal of existing roof assemblies, installation of new roofing systems, rough carpentry at parapets and curbs, sheet metal flashings, exterior sealants, installation of new retrofit roof drains and piping, and reinstallation of fall protection systems. Bonds: 10% Bid Bond, 50% Performance Bond, 50% Payment Bond. Official bid documents must be obtained from www.bgis.merx.com QA date - 10/21/2026 at 2:00 PM ET Scope of Work Replacement of building roof components and drain assemblies as defined within the project issued drawing and specification documents. Take note of DSR report associated with the insulation and for the required removal procedures associated with roof drain assemblies on the interior of the building. Contractor will carry all costs within their tender submission. Review all documentation posted for this project tender. Note security clearance requirements for personnel. The following description provides a general overview of the Scope of Work of this project: Complete project in accordance with all federal , provincial and municipal regulations and directives. Work of this Contract includes, but it is not limited to, the following roof cladding restoration work, i.e., supply all labour, material , equipment, and supervision to complete the removal of existing roof assemblies and install new roofing systems to obtain a watertight condition for the long term as specified herein. Remove any hazardous waste bags from site immediately following work. Hazardous materials must be removed at the end of the Contractor's shift each day and stored in a locked disposable bin on the ground level. Hazardous materials will not be stored indoors. Dispose of in accordance with requirements of Provincial/Territorial and Federal Authority having jurisdiction. Supply and install the following components, in addition to the roof systems: Rough carpentry at parapets and curbs. Sheet metal caps, counter flashings, scuppers, torch stops, fascia (metal siding) and any other roof metal flashings to complete the roof installation. Exterior sealants to seal transitions of membrane and any related metal details, and at terminations of sheet metal and non-membrane surfaces. New retrofit roof drains and new piping as details and indicated in drawings. New retrofit roof drains/piping shall be in the existing locations and shall include all required clamps, hangers, insulation, vapour wrap and all other items required to complete the new retrofit roof drain installation. Temporary removal and reinstatement of the existing ballasted guardrail to facilitate construction. Removal and reinstatement of the existing horizontal lifeline, fall protection system tie-off cables, to facilitate construction. BGIS will be responsible for the inspection and certification of the fall protection system upon reinstallation