Site work and renovation of an educational facility in Mattoon, Illinois. Completed plans call for the renovation of a educational facility.

Roof replacement for the Northwest Building and Webb Hall. Scope of work Remove existing roof down to deck and dispose of according to all local and state guidelines. Mechanically attach 2 layers of 2.6" rigid polyisocyanurate per wind uplift found in drawing , using approved wind-up lift requirements. Install 1/2" primed dens-deck set in approved insulation adhesive per wind up lift requirements. Install 12-12 tapered crickets and saddles as shown on drawings. Install modified sbs BASE sheet set in cold applied asphalt at 2.5 gal per square. Install modified mineral sbs cap sheet set in cold applied asphalt at 2.5 gal per square and heat weld all field and flashing seams. Flashings shall consist of: A. Sbs modified BASE sheet set in cold applied flashing adhesive at 5 gal per square. B. Sbs modified mineral cap sheet set in cold applied flashing adhesive at 5 gal per square and heat weld all vertical seams. C. Three-course inside and outside corners of curbs and walls with approved flashing adhesive and mesh. Replace clamping rings and strainers on drains, make sure they are all painted with rustoleum fire engine red spray paint. All soil stacks and drains shall receive new leads. See drawings for all metal flashing details and components. This project and bid will be taken to the Board of Trustees meeting in December of 2026 for approval. Question Deadline 11/12/2026 If any Bidder is in doubt as to the meaning of any part of the Bidding Documents, they may submit a written request to: Facilities Planning Manager, 5001 Lake Land Boulevard, Mattoon, Illinois 61938.