Renovation of a mixed-use development in Dallas, Texas. Conceptual plans call for the renovation of a medical facility.

Replace valves, gaskets, and vent lines on the main steam header and Boilers 1, 2, and 3 in the Energy Center. The contractor shall provide all labor, supplies, materials, equipment, transportation, supervision, and management necessary to remove, furnish, install, and test the new components. Work includes coordinating equipment shutdowns with facility personnel, performing lockout/tagout procedures, removing existing valves, vent lines, and associated components, inspecting the interior of the main steam header and drip leg for blockages, cleaning flange faces, and installing new spiral-wound gaskets. New steam valves shall be installed with steam balancing and vent lines utilizing Schedule 80 carbon steel piping and full-port, three-piece bolted ball valves that allow internal component access without unthreading from the supply line. The project also includes installation of removable high-temperature insulation jackets on all steam valves, replacement of boiler steam stop, isolation, and vent valves with new vent piping for Boilers 1, 2, and 3, and performance of leak checks during boiler startup and campus pressurization to 110 psi. Replacement valves and piping shall meet or exceed existing system specifications and comply with applicable steam industry standards and regulations. The Method of Contractor Selection has not been determined at this Time.